|
|
Applications of Quantitative Area Risk Assessment to the Manufactory of Civil Explosives |
HOU Haizhou1, HU Yiting1, YANG Jiafu2, WANG Dahuan3 |
1. School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China;2. China Ordnance Industrial Safety Technology Research Institute, Beijing 100053, China;3. Beijing Guokeanlian Safety Assessment Co. Ltd., Beijing 100037, China |
|
|
Abstract: Dangerous sources in the manufactory of the civil explosives are the important factors affecting the level of area safety. A Quantitative Area Risk Assessment (QARA) method and its applications to the planning for dangerous sources were briefly introduced. A model of the method on area risk assessment is developed. The individual and social risk indexes, the acceptable risk levels of individual risk and social risk as well as the calculating procedures are briefly proposed based on the existing criteria of individual risk and social risk from other countries. The detailed steps, main work contents, and general methods concerned and noticed in the quantitative risk assessment procedure are given. These are very helpful to the applications of QARA. The QARA is utilized to assess the manufactory of the civil explosives. The individual risk contour and the social risk chart are obtained after the analysis. The method could not only reflect the distribution of regional risks, but also provide a decision support for the planning and layout of the risk sources in the manufactory of civil explosives.
|
Received: 06 December 2010
|
|
|
|
|
[1] |
JIANG Xuepeng;LIU Qi. TheWind Velocity of Longitudinal Air Supply for the Central Smoke Extraction System on Tunnel Fire[J]. , 2013, 31(8): 51-56. |
[2] |
JIANG Xuepeng;ZHANG Yangshu;XU Zhisheng;WEI Dong. Effect of Different Exhaust Rates on Fire Smoke Control in a Shield Tunnel[J]. , 2012, 30(15): 40-44. |
[3] |
ZHAO Zhou;HOU Enke. The Life Risk Acceptability Criteria for the Geo-hazards in China[J]. , 2011, 29(36): 17-22. |
[4] |
HOU Haizhou;HU Yiting;WEI Yan'an. Experimental Investigation and Analysis on the Safe Distance of Propagation Blast for Industrial Detonators[J]. , 2011, 29(22): 58-60. |
[5] |
. Study on Expression Models for Professional Accreditation of Safety Engineering Undergraduate Education[J]. , 2009, 27(0916): 74-77. |
|
|
|
|