|
|
Hot research topics of eco-materials and corresponding technologies in 2020 |
LIU Shuang1, LIANG Hanying1, LIU Xuesong2, WAN Jie3, WENG Duan4 |
1. School of Materials Science and Engineering, Ocean University of China, Qingdao 266100, China;
2. College of Chemistry and Chemical Engineering, Shaoxing University, Shaoxing 312000, China;
3. Energy Research Institute, Nanjing Institute of Technology, Nanjing 211167, China;
4. Key Laboratory of Advanced Materials of Ministry of Education, School of Material Science and Engineering, Tsinghua University, Beijing 100084, China |
|
|
Abstract: In 2020 the development of eco-materials led to significant progresses in environmental governance, clean energy and clean production. In this paper, some selected hot topics about recent breakthroughs of eco-materials are reviewed, including plastic degradation, catalytic purification of mobile/industrial exhaust gas, CO2 conversion, solar cell, lithium battery, energy conservation, and additive manufacturing. In the end, the developing tendency of eco-materials is indicated.
|
Received: 22 December 2020
|
|
|
|
[1] 翁端, 冉瑞, 王蕾. 环境材料学[M]. 第2版. 北京:清华大学出版社, 2011:1-13.
[2] Montarnal D, Capelot M, Tournilhac F, et al. Silica-Like malleable materials from permanent organic networks[J]. Science, 2011, 334(6058):965-968.
[3] García J M, Jones G O, Virwani K, et al. Recyclable, strong thermosets and organogels via paraformaldehyde condensation with diamines[J]. Science, 2014, 344(6185):732-735.
[4] Christensen P R, Scheuermann A M, Loeffler K E, et al. Closed-loop recycling of plastics enabled by dynamic covalent diketoenamine bonds[J]. Nature Chemistry, 2019, 11(5):442-448.
[5] Zhu J, Watson E M, Tang J, et al. A synthetic polymer system with repeatable chemical recyclability[J]. Science, 2018, 360(6387):398-403.
[6] Jehanno C, Sardon H. A step towards truly recyclable plastics[J]. Nature, 2019, 568(7753):467-468.
[7] Shieh P, Zhang W X, Husted K E L, et al. Cleavable comonomers enable degradable, recyclable thermoset plastics[J]. Nature, 2020, 583(7817):542-547.
[8] Zhang F, Zeng M H, Yappert R D, et al. Polyethylene upcycling to long-chain alkylaromatics by tandem hydrogenolysis/aromatization[J]. Science, 2020, 370(6515):437-441.
[9] Weckhuysen B M. Creating value from plastic waste[J]. Science, 2020, 370(6515):400-401.
[10] Yang Y, Yang J, Wu W, et al. Biodegradation and mineralization of polystyrene by plastic-eating mealworms:part 1. chemical and physical characterization and isotopic tests[J]. Environmental Science & Technology, 2015, 49(20):12080-12086.
[11] Yang Y, Yang J, Wu W, et al. Biodegradation and mineralization of polystyrene by plastic-eating mealworms:Part 2. role of gut microorganisms[J]. Environmental Science & Technology, 2015, 49(20):12087-12093.
[12] Yoshida S, Hiraga K, Takehana T, et al. A bacterium that degrades and assimilates poly(ethylene terephthalate)[J]. Science, 2016, 351(6278):1196-1199.
[13] Tournier V, Topham C M, Gilles A, et al. An engineered PET depolymerase to break down and recycle plastic bottles[J]. Nature, 2020, 580(7802):216-219.
[14] Wei R, Tiso T, Bertling J, et al. Possibilities and limitations of biotechnological plastic degradation and recycling[J]. Nature Catalysis, 2020, 3:867-871.
[15] Farrauto R J, Deeba M, Alerasool S. Gasoline automobile catalysis and its historical journey to cleaner air[J]. Nature Catalysis, 2019, 2(4):603-613.
[16] Lambert C K. Current state of the art and future needs for automotive exhaust catalysis[J]. Nature Catalysis, 2019, 2(7):554-557.
[17] Datye A K, Votsmeier M. Opportunities and challenges in the development of advanced materials for emission control catalysts[J]. Nature Materials, 2020, doi:10.1038/s41563-020-00805-3.
[18] Johns J, Xiong H F, DeLaRiva A T, et al. Thermally stable single-atom platinum-on-ceria catalysts via atom trapping[J]. Science, 2016, 353(6295):150-154.
[19] Nie L, Mei D F, Xiong H F, et al. Activation of surface lattice oxygen in single-atom Pt/CeO2 for low-temperature CO oxidation[J]. Science, 2017, 358(6369):1419-1423.
[20] Getsoian A, Theis J R, Paxton W A, et al. Remarkable improvement in low temperature performance of model three-way catalysts through solution atomic layer deposition[J]. Nature Catalysis, 2019, 2(7):614-622.
[21] Jeong H, Kwon O, Kim B, et al. Highly durable metal ensemble catalysts with full dispersion for automotive applications beyond single-atom catalysts[J]. Nature Catalysis, 2020, 3(4):368-375.
[22] Paolucci C, Di Iorio J R, Schneider W F, et al. Solvation and mobilization of copper active sites in zeolites by ammonia:Consequences for the catalytic reduction of nitrogen oxides[J]. Accounts of Chemical Research, 2020, 53(9):1881-1892.
[23] Becher J, Sanchez D F, Doronkin D E, et al. Chemical gradients in automotive Cu-SSZ-13 catalysts for NOx removal revealed by operando X-ray spectrotomography[J]. Nature Catalysis, 2020, doi:10.1038/s41929-020-00552-3.
[24] Welch A J, Dunn E, DuChene J S, et al. Bicarbonate or carbonate processes for coupling carbon dioxide capture and electrochemical conversion[J]. ACS Energy Letters, 2020, 5(3):940-945.
[25] Boyd P G, Chidambaram A, García-Díez E, et al. Datadriven design of metal-organic frameworks for wet flue gas CO2 capture[J]. Nature, 2019, 576(7786):253-256.
[26] Kim E J, Siegelman R L, Jiang H Z H, et al. Cooperative carbon capture and steam regeneration with tetraamine-appended metal-organic frameworks[J]. Science, 2020, 369(6502):392-396.
[27] Wu Y S, Jiang Z, Lu X, et al. Domino electroreduction of CO 2 to methanol on a molecular catalyst[J]. Nature, 2019, 575(7784):639-642.
[28] Li H Z, Qiu C L, Ren S J, et al. Na+-gated water-conducting nanochannels for boosting CO2 conversion to liquid fuels[J]. Science, 2020, 367(6478):667-671.
[29] Zhong M, Tran K, Min Y M, et al. Accelerated discovery of CO 2 electrocatalysts using active machine learning[J]. Nature, 2020, 581(7807):178-183.
[30] de Arquer F P G, Dinh C, Ozden A, et al. CO2 electrolysis to multicarbon products at activities greater than 1 A cm-2[J]. Science, 2020, 367(6478):661-666.
[31] Song Y D, Ozdemir E, Ramesh S, et al. Dry reforming of methane by stable Ni-Mo nanocatalysts on single-crystalline MgO[J]. Science, 2020, 367(6479):777-781.
[32] Miller T E, Beneyton T, Schwander T, et al. Light-powered CO 2 fixation in a chloroplast mimic with natural and synthetic parts[J]. Science, 2020, 368(6491):649-654.
[33] Jiang Z, Xu X H, Ma Y H, et al. Filling metal-organic framework mesopores with TiO2 for CO2 photoreduction[J]. Nature, 2020, 586(7830):549-554.
[34] Xu J X, Boyd C C, Yu Z S J, et al. Triple-halide wideband gap perovskites with suppressed phase segregation for efficient tandems[J]. Science, 2020, 367(6482):1097-1104.
[35] Doherty T A S, Winchester A J, Macpherson S, et al. Performance-limiting nanoscale trap clusters at grain junctions in halide perovskites[J]. Nature, 2020, 580(7803):360-366.
[36] Lin Y, Sakai N, Da P, et al. A piperidinium salt stabilizes efficient metal-halide perovskite solar cells[J]. Science, 2020, 369(6499):96-102.
[37] Lu H Z, Liu Y H, Ahlawat P, et al. Vapor-assisted deposition of highly efficient, stable black-phase FAPbI 3 perovskite solar cells[J]. Science, 2020, 370(6512):eabb8985.
[38] Kim G, Min H, Lee K S, et al. Impact of strain relaxation on performance of α-formamidinium lead iodide perovskite solar cells[J]. Science, 2020, 370(6512):108-112.
[39] Jeong M, Choi I W, Go E M, et al. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss[J]. Science, 2020, 369(6511):1615-1620.
[40] Lei Y S, Chen Y M, Zhang R Q, et al. A fabrication process for flexible single-crystal perovskite devices[J]. Nature, 2020, 583(7818):790-795.
[41] Shi L, Bucknall M P, Young T L, et al. Gas chromatography-mass spectrometry analyses of encapsulated stable perovskite solar cells[J]. Science, 2020, 368(6497):eaba2412.
[42] Li X, Zhang F, He H Y, et al. On-device lead sequestration for perovskite solar cells[J]. Nature, 2020, 578(7796):555-558.
[43] Li M, Lu J. Cobalt in lithium-ion batteries[J]. Science, 2020, 367(6481):979-980.
[44] Bi Y J, Tao J H, Wu Y Q, et al. Reversible planar gliding and microcracking in a single-crystalline Ni-rich cathode[J]. Science, 2020, 370(6522):1313-1317.
[45] Zhang W, Seo D, Chen T, et al. Kinetic pathways of ionic transport in fast-charging lithium titanate[J]. Science, 2020, 367(6481):1030-1034.
[46] Liu H D, Zhu Z Y, Yan Q Z, et al. A disordered rock salt anode for fast-charging lithium-ion batteries[J]. Nature, 2020, 585(7823):63-67.
[47] Jin H C, Xin S, Chuang C H, et al. Black phosphorus composites with engineered interfaces for high-rate high-capacity lithium storage[J]. Science, 2020, 370(6513):192-197.
[48] Xu W H, Zheng H X, Liu Y, et al. A droplet-based electricity generator with high instantaneous power density[J]. Nature, 2020, 578(7795):392-396.
[49] Joo W, Kyoung J, Esfandyarpour M, et al. Metasurfacedriven OLED displays beyond 10,000 pixels per inch[J]. Science, 2020, 370(6515):459-463.
[50] Kim T, Kim K, Kim S, et al. Efficient and stable blue quantum dot light-emitting diode[J]. Nature, 2020, 586(7829):385-389.
[51] Raman A P, Anoma M A, Zhu L X, et al. Passive radiative cooling below ambient air temperature under direct sunlight[J]. Nature, 2014, 515(7528):540-544.
[52] Zhai Y, Ma Y G, David S N, et al. Scalable-manufactured randomized glass-polymer hybrid metamaterial for daytime radiative cooling[J]. Science, 2017, 355(6329):1062-1066.
[53] Li T, Zhai Y, He S M, et al. A radiative cooling structural material[J]. Science, 2019, 364(6442):760-763.
[54] Yin X B, Yang R G, Tan G, et al. Terrestrial radiative cooling:Using the cold universe as a renewable and sustainable energy source[J]. Science, 2020, 370(6518):786-791.
[55] Li X Q, Sun B W, Sui C X, et al. Integration of daytime radiative cooling and solar heating for year-round energy saving in buildings[J]. Nature Communications, 2020, 11(1):6101.
[56] Lavine M S. Large-scale, continuous 3D printing[J]. Science, 2019, 366(6463):320.
[57] Tumbleston J R, Shirvanyants D, Ermoshkin N, et al. Continuous liquid interface production of 3D objects[J]. Science, 2015, 347(6228):1349-1352.
[58] Kelly B E, Bhattacharya I, Heidari H, et al. Volumetric additive manufacturing via tomographic reconstruction[J]. Science, 2019, 363(6431):1075-1079.
[59] Walker D A, Hedrick J L, Mirkin C A. Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface[J]. Science, 2019, 366(6463):360-364.
[60] Zhao S Y, Siqueira G, Drdova S, et al. Additive manufacturing of silica aerogels[J]. Nature, 2020, 584(7821):387-392.
[61] Zhang D Y, Qiu D, Gibson M A, et al. Additive manufacturing of ultrafine-grained high-strength titanium alloys[J]. Nature, 2019, 576(7811):91-95.
[62] Kürnsteiner P, Wilms M B, Weisheit A, et al. Highstrength Damascus steel by additive manufacturing[J]. Nature, 2020, 582(7813):515-519.
[63] Zhao C, Parab N D, Li X X, et al. Critical instability at moving keyhole tip generates porosity in laser melting[J]. Science, 2020, 370(6520):1080-1086.
[64] Khairallah S A, Martin A A, Lee J R I, et al. Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing[J]. Science, 2020, 368(6491):660-665.
[65] Polonsky A T, Pollock T M. Closing the science gap in 3D metal printing[J]. Science, 2020, 368(6491):583-584. |
[1] |
LI Cunpu, CHEN Hongping, WEI Zidong. Clean energy in 2020: A research hotspots review[J]. Science & Technology Review, 2021, 39(1): 248-260. |
[2] |
MENG Xiangyu, GU Alun, WU Xinguo, LIU Bin, HE Chaohui, MAO Zongqiang. Review of China's hydrogen industry policy and scientific and technological development hotspots in 2019[J]. Science & Technology Review, 2020, 38(3): 172-183. |
[3] |
WAN Jie, YUAN Xiaoxian, WU Gongde, WENG Duan. Hot topics of eco-materials science and engineering in 2019[J]. Science & Technology Review, 2020, 38(1): 93-107. |
[4] |
SI Zhichun, WU Xiaodong, RAN Rui, WENG Duan. Hot research topics of carbon electrode in 2019[J]. Science & Technology Review, 2020, 38(1): 108-114. |
[5] |
LI Cunpu, TANG Hongan, WEI Zidong. Clean energy in 2019-A research hotspots[J]. Science & Technology Review, 2020, 38(1): 125-136. |
[6] |
LI Linlin, WANG Guoqing, QIN Pan, ZHAO Jian, WAN Zhengfen, AI Shaobi, CHENG Yongqian, LU Shaoyong. Water environmental quality of Baiyangdian Lake and its treatment and protection countermeasures[J]. Science & Technology Review, 2019, 37(21): 14-25. |
|
|
|
|