|
|
Application of composite honeycomb sandwich structure in aircraft |
LIU Minjing, WU Zhanjun |
State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China |
|
|
Abstract: Honeycomb sandwich panel structure is one of the most efficient structures in aircraft. Several types of honeycomb sandwich panels, honeycomb core material and the typical cellular geometry are introduced, as well as corresponding performances. The application situations of honeycomb sandwich structures in both major foreign and domestic aircraft are described. Finally, some design ideas and concepts are discussed.
|
Received: 30 November 2015
|
|
|
|
[1] 杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1): 1-12. Du Shanyi. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica, 2007, 24(1): 1-12.
[2] 杜善义, 关志东. 我国大型客机先进复合材料技术应对策略思考[J]. 复合材料学报, 2008, 25(1): 1-10. Du Shanyi, Guan Zhidong. Strategic considerations for development of advanced composite technology for large commercial aircraft in China[J]. Acta Materiae Compositae Sinica, 2008, 25(1): 1-10.
[3] 杨乃宾, 梁伟. 大飞机复合材料结构设计导论[M]. 北京: 航空工业出版社, 2009: 1-6. Yang Naibing, Liang Wei. Introduction to composite structural design for large aircraft[M]. Beijing: Aviation Industry Press, 2009: 1-6.
[4] 张广成, 何祯, 刘良威, 等. 夹层结构复合材料低速冲击试验与分析[J]. 复合材料学报, 2012, 29(4): 170-177. Zhang Guangcheng, He Zhen, Liu Liangwei, et al. Low-velocity impact experiment and analysis of sandwich structure composites[J]. Acta Materiae Compositae Sinica, 2012, 29(4): 170-177.
[5] 牛春匀. 实用飞机复合结构设计与制造[M]. 程小全, 张纪奎, 译. 北京: 航空工业出版社, 2010: 90-99, 456-486, 532-537. Niu C Y. Composite airframe structures[M]. Cheng Xiaoquan, Zhang Jikui, trans. Beijing: Aviation Industry Press, 2010:90-99, 456-486, 532-537.
[6] 程文礼, 袁超, 邱启艳, 等. 航空用蜂窝夹层结构及制造工艺[J]. 航空制造技术, 2015(7): 94-98. Cheng Wenli, Yuan Chao, Qiu Qiyan, et al. Honeycomb sandwich structure and manufacturing process in aviation industry[J]. Aeronautical Manufacturing Technology, 2015(7): 94-98.
[7] 范秋习. 蜂窝夹层复合材料[J]. 北京轻工业学报, 1998, 16(2): 77-81. Fan Qiuxi. Honeycomb sandwich composite[J]. Journal of Beijing Institute of Light Industry, 1998, 16(2): 77-81.
[8] 陈龙辉, 付杰斌, 王强, 等. 复合材料夹层结构在航空领域的应用[J]. 教练机, 2014(2): 44-48. Chen Longhui, Fu Jiebin, Wang Qiang, et al. Application of composite sandwich structure on aviation[J]. Trainer, 2014(2): 44-48.
[9] Fam A, Sharaf T. Flexural performance of sandwich panels comprising polyurethane core and GFRP skins and ribs of various configurations[J]. Composite Structures, 2010, 92(12): 2927-2935.
[10] 王闯, 刘荣强, 邓宗全, 等. 铝蜂窝结构的冲击动力学性能的试验及数值研究[J]. 振动与冲击, 2008, 27(11): 56-61. Wang Chuang, Liu Rongqiang, Deng Zongquan, et al. Experimental and numerical studies on aluminum honeycomb structure with various cell specifications under impact loading[J]. Journal of Vibration and Shock, 2008, 27(11): 56-61
[11] 杜正兴, 薛应举, 刘洪权. 复合材料蜂窝夹层结构的总体稳定性研究[J]. 强度与环境, 2014, 41(4): 27-32. Du Zhengxing, Xue Yingju, Liu Hongquan. General stability research of honeycomb sandwich structure[J]. Structure & Environment Engineering, 2014, 41(4): 27-32.
[12] 罗云烽, 彭公秋, 曹正华, 等. 航空用热压罐外固化预浸料复合材料的应用[J]. 航空制造技术, 2012(18): 26-31. Luo Yunfeng, Peng Gongqiu, Cao Zhenghua, et al. Application of composites manufactured with out-of-autoclave prepreg for aviation industry[J]. Aeronautical Manufacturing Technology, 2012(18): 26-31.
[13] Davalos J F, Qiao P Z, Ramayanam V, et al. Torsion of honeycomb FRP sandwich beams with a sinusoidal core configuration[J]. Composite Structures, 2009, 88(1): 97-111.
[14] 章令晖, 韩宇, 沃西源, 等. 蜂窝夹层结构常见制造缺陷分析[J]. 航天返回与遥感, 2006, 27(1): 57-61. Zhang Linghui, Han Yu, Wo Xiyuan, et al. Analysis on process defects of honeycomb sandwich[J]. Spacecraft Recovery & Remote Sensing, 2006, 27(1): 57-61.
[15] Gandy H T N. Adhesive less honeycomb sandwich structure with carbon graphite prepeg for primary structural application: A comparative study to the use of adhesive film[D]. Kansas: Wichita State University, 2012. |
[1] |
XIE Mingliang, PENG Chaoyi, DING Haibin. Effect of enviroment loading on the electric properties of carbon fabric[J]. Science & Technology Review, 2016, 34(8): 67-70. |
[2] |
TAO Jiongming, SU Ruobin, KONG Xiangsen, ZHAO Chuan, ZHOU Jing. Requirement analysis of new composite materials on the development of satellite structure technology[J]. Science & Technology Review, 2016, 34(8): 18-20. |
[3] |
ZHANG Jing, YU Jin, XIONG Lei, SUN Wei. Performance and molding processes of automotive carbon fiber reinforced plastics[J]. Science & Technology Review, 2016, 34(8): 26-30. |
[4] |
ZHAO Fagang, FENG Yanjun, FAN Fan, ZHOU Xubin, ZHOU Chunhua. Research on on-orbit health monitoring method about composite structure in satellites[J]. Science & Technology Review, 2016, 34(8): 15-17. |
[5] |
CHEN Ling, WU Fangfang, MA Heng, WANG Lifeng, WEI Yili, GAO Yibo. Applications of FRP in electric power network[J]. Science & Technology Review, 2016, 34(8): 77-83. |
[6] |
XU Qinglin, ZENG Jingcheng, WU Zhihua, WU Binrui. Finite element simulation of the RC bridge structure strengthened with composites[J]. Science & Technology Review, 2016, 34(8): 84-88. |
|
|
|
|