井下抽油泵吸入口附近腐蚀模拟试验装置研制
高斐1 , 楼一珊1 , 吴琼2 , 唐礼骅3 , 闵江本1 , 李贻浩1 , 姜美婷1
1. 长江大学油气资源与勘探技术教育部重点实验室; 长江大学石油工程学院, 武汉 434023;
2. 中石化河南油田分公司勘探开发研究院, 河南南阳 473132;
3. 中石化江苏油田分公司石油工程技术研究院, 江苏扬州 225008
Development of Dynamic Simulation Test Device for the Corrosion Near Downhole Pump Suction Port
GAO Fei1 , LOU Yishan1 , WU Qiong2 , TANG Lihua3 , MIN Jiangben1 , LI Yihao1 , JIANG Meiting1
1. Key Laboratory of Exploration Technologies for Oil and Gas Resources, MOE, Yangtze University; Department of Petroleum Engineering, Yangtze University, Wuhan 434023, China;
2. Research Institute of Exploration and Development, Henan Oilfield Company, Sinopec,Nanyang 473132, Henan Province, China;
3. Engineering and Technology Institute, Jiangsu Oilfield Company,Sinopec,Yangzhou 225008,Jiangsu Province,China
摘要 油田井下抽油泵吸入口附近套管腐蚀穿孔现象比较普遍,严重影响油田的稳产。为研究其腐蚀机制,自行设计和制造了一种井下抽油泵吸入口附近动态腐蚀模拟试验装置。该装置采用单柱塞泵和与现场一致的油套管柱结构,真实模拟了抽油泵间歇性的生产方式以及泵吸入口附近流体的流动状态,实现了不同温度、CO2 分压、流速等条件下腐蚀速率的测定及腐蚀行为的研究,可为套管选材提供参考。试验结果表明,抽油泵吸入口附近腐蚀介质的流速流态是造成该处套漏的主控因素,并以CO2 局部腐蚀为主,与现场套损状况一致。
关键词 :
腐蚀 ,
抽油泵吸入口 ,
腐蚀速率
Abstract :The corrosion of the casing near a downhole pump suction port is common in some domestic oilfields, and it has a serious impact on the stable production of the oilfield. In order to study the corrosion mechanism, we have designed and manufactured a dynamic simulation test device for the corrosion of the casing near the downhole pump suction port. The device consists of a single plunger pump and a tube and casing strings in line with the site structure to simulate the intermittent production mode of the pump as well as the fluid flow state near the pump inlet adequately, and the corrosion velocity measurement can be made and the corrosion behavior can be studied under different temperatures, CO2 partial pressures, and velocities to provide important data for the casing materials. The test results show that the flow rate and flow pattern of the corrosive medium near the oil pump suction port are the main factors of casing-leakage, and CO2 local corrosion is the main way, which is in accordance with the casing damage status.
Key words :
corrosion
pump suction port
corrosion rate
收稿日期: 2013-07-09
基金资助: 国家自然科学基金项目(51274047)
通讯作者:
楼一珊,教授,研究方向为岩石力学与石油工程、钻完井,电子信箱:louys2006@126.com
E-mail: louys2006@126.com
作者简介 : 高斐,博士研究生,研究方向为岩石力学与钻井工程,电子信箱:fgat163@163.com
引用本文:
高斐, 楼一珊, 吴琼, 唐礼骅, 闵江本, 李贻浩, 姜美婷. 井下抽油泵吸入口附近腐蚀模拟试验装置研制[J]. 科技导报, 2013, 31(36): 46-49.
GAO Fei, LOU Yishan, WU Qiong, TANG Lihua, MIN Jiangben, LI Yihao, JIANG Meiting. Development of Dynamic Simulation Test Device for the Corrosion Near Downhole Pump Suction Port. journal1, 2013, 31(36): 46-49.
链接本文:
http://www.kjdb.org/CN/10.3981/j.issn.1000-7857.2013.36.007 或 http://www.kjdb.org/CN/Y2013/V31/I36/46
[1] 秦永妮, 李春福, 尤郭群. 高温高压下CO2 对N80钢的腐蚀实验研究[J]. 全面腐蚀控制, 2008, 22(6): 19-21. Qin Yongni, Li Chunfu, You Guoqun. Total Corrosion Control, 2008, 22 (6): 19-21.
[2] 李珣, 姜放, 陈文梅, 等. 高温高压下N80的CO2 腐蚀[J]. 天然气与石油, 2006, 24(6): 21-23. Li Xun, Jiang Fang, Chen Wenmei, et al. Natural Gas and Oil, 2006, 24 (6): 21-23.
[3] 陈尧, 白真权, 熊惠. N80钢在高温高压下的抗CO2 腐蚀性能[J]. 石油与天然气化工, 2006, 35(6): 470-472. Chen Yao, Bai Zhenquan, Xiong Hui. Chemical Engineering of Oil & Gas, 2006, 35(6): 470-472.
[4] 周建龙, 李晓刚, 程学群, 等. 新型环烷酸腐蚀动态模拟试验装置的研制[J]. 材料保护, 2010, 43(2): 53-56. Zhou Jianlong, Li Xiaogang, Cheng Xuequn, et al. Materials Protection, 2010, 43(2): 53-56.
[5] 梁明华, 赵国仙, 冯耀荣, 等. KO110与3Cr110钢的CO2 腐蚀实验对比研究[J]. 腐蚀与防护, 2005, 26(6): 240-243. Liang Minghua, Zhao Guoxian, Feng Yaorong, et al. Corrosion & Protec-tion, 2005, 26(6): 240-243.
[6] 郭少强, 许立宁, 常炜, 等. 3Cr管线钢CO2 腐蚀实验研究[J]. 金属学报, 2011, 47(8): 1067-1074. Guo Shaoqiang, Xu Lining, Chang Wei, et al. Acta Metallurgica Sinica, 2011, 47(8): 1067-1074.
[7] 林玉珍, 雍兴跃, 徐瑞芬. 动态腐蚀模拟实验装置的研制[J]. 全面腐蚀控制, 1995, 9(2): 7-10. Lin Yuzhen, Yong Xingyue, Xu Ruifen. Total Corrosion Control, 1995, 9 (2): 7-10.
[8] 李珣, 姜放, 陈文梅, 等. 井下油套管二氧化碳腐蚀[J]. 石油与天然气化工, 2006, 35(4): 300-303. Li Xun, Jiang Fang, Chen Wenmei, et al. Chemical Engineering of Oil & Gas, 2006, 35(4): 300-303.
[9] 郑玉贵, 姚治铭, 龙康, 等. 液/固双相流冲刷腐蚀实验装置的研制及动态电化学测试[J]. 腐蚀科学与防护, 1993, 5(4): 286-290. Zheng Yugui, Yao Zhiming, Long Kang, et al. Corrosion Science and Pro-tection Technology, 1993, 5(4): 286-290.
[10] 郑玉贵, 阎永贵, 龙康, 等. 双相流冲刷腐蚀激光多普勒测试装置及其校正[J]. 中国腐蚀与防护学报, 1999, 19(5): 301-305. Zheng Yugui, Yan Yonggui, Long Kang, et al. Journal of Chinese Society for Corrosion and Protection, 1999, 19(5): 301-305.
[11] 姜胜利, 郑玉贵, 乔岩欣, 等. 高速喷射式冲刷腐蚀实验装置的研制及其实时动态电化学测试[J]. 腐蚀科学与防护, 2009, 21(5): 489-491. Jiang Shengli, Zheng Yugui, Qiao Yanxin, et al. Corrosion Science and Protection Technology, 2009, 21(5): 489-491.
[12] 郑玉贵, 姚治铭, 柯伟. 冲刷腐蚀的研究近况[J]. 材料科学与工程, 1992, 10(3): 21-26. Zheng Yugui, Yao Zhiming, Ke Wei. Materials Science and Engineering of Powder Metallurgy, 1992, 10(3): 21-26.
[13] Heitz E. Investigation of hydrodynamic test systems for the selection of high flow rate resistant materials[J]. Journal of Applied Electrochemistry, 1979, 9(2): 243-253.
[14] Dean S W. Velocity-accelerated corrosion testing and prediction[J]. Materials Performance, 1990, 29(9): 61-67.
[15] Chen T Y, Moccari A A. Development of controlled hydrodynamic techniques for corrosion testing[J]. Corrosion, 1992, 48(3): 239-255.
[16] 赵景茂, 顾明广, 左禹. 碳钢在二氧化碳溶液中腐蚀影响因素的研究[J]. 北京化工大学学报, 2005, 32(5): 71-74. Zhao Jingmao, Gu Mingguang, Zuo Yu. Journal of Beijing University of Chemical Technology, 2005, 32(5): 71-74.
[17] 万里平, 孟英峰, 梁发书. 油气田开发中的二氧化碳腐蚀及影响因素[J]. 全面腐蚀控制, 2003, 17(2): 14-17. Wan Liping, Meng Yingfeng, Liang Fashu. Total Corrosion Control, 2003, 17(2): 14-17.
[18] 龙凤乐, 郑文军, 陈长风, 等. 温度、CO2 分压、流速、pH值对X65管线钢CO2 均匀腐蚀速率的影响规律[J]. 腐蚀与防护, 2005, 26(7): 290-293. Long Fengle, Zheng Wenjun, Chen Changfeng, et al. Corrosion & Protec-tion, 2005, 26(7): 290-293.
[19] 张学元, 邸超, 雷良才. 二氧化碳腐蚀与控制[M]. 北京: 化学工业出版社, 2000. Zhang Xueyuan, Di Chao, Lei Liangcai. Corrosion and control of carbon dioxide[M]. Beijing: Chemical Industry Press, 2000.
[20] 赵章明. 油气井腐蚀防护与材质选择指南[M]. 北京: 石油工业出版社, 2011. Zhao Zhangming. Corrosion protection of oil and gas wells and material selection guide[M]. Beijing: Petroleum Industry Press, 2011.
[1]
张志宏, 张江江, 高秋英, 孙海礁, 肖雯雯. 塔河油田某侧钻深井油管断裂失效原因 [J]. 科技导报, 2014, 32(7): 62-66.
[2]
张江江, 刘冀宁, 高秋英, 羊东明, 臧晗宇, 张涛, 肖雯雯, 江瑞. 湿相CO2 环境管道内沉积物及对腐蚀影响的定量化研究 [J]. 科技导报, 2014, 32(32): 67-71.
[3]
张江江. 塔河油田注气井管道腐蚀特征及规律 [J]. 科技导报, 2014, 32(31): 65-70.
[4]
李效波, 张海龙. 热采筛管冲蚀与腐蚀迭加作用机理 [J]. 科技导报, 2014, 32(3): 49-55.
[5]
郭霖, 徐秀清. S2- 浓度对含盐污水中10# 碳钢腐蚀性能的影响 [J]. 科技导报, 2014, 32(24): 31-34.
[6]
高秋英, 张江江, 杨祖国, 羊东明, 刘冀宁, 臧晗宇, 朱原原, 张涛. 20# 碳钢管道内沉积物对腐蚀行为的影响 [J]. 科技导报, 2014, 32(24): 35-39.
[7]
李子凡, 肖葵, 魏丹, 董超芳, 张鑫, 李晓刚. Cr合金在含Cl- 和SO4 2- 离子溶液中的腐蚀行为 [J]. 科技导报, 2014, 32(21): 26-30.
[8]
王荣山, 徐超亮, 黄平, 刘向兵, 陈明亚. 堆内构件用不锈钢辐照加速应力腐蚀开裂研究进展 [J]. 科技导报, 2014, 32(20): 79-83.
[9]
朱培珂, 邓金根, 黄凯文, 罗宇维, 朱江林, 吴山. 油气田现场腐蚀检测装置设计与应用 [J]. 科技导报, 2014, 32(19): 68-72.
[10]
王丽忱, 甄鉴, 朱桂清. 国外套管腐蚀检测技术研究进展 [J]. 科技导报, 2014, 32(18): 67-72.
[11]
赵博;杜翠薇;李晓刚;刘智勇;陈旭;李月强. 剥离涂层下的埋地管线钢腐蚀研究进展与展望 [J]. , 2013, 31(8): 72-79.
[12]
吕虹玮;董士刚;王静静;李宁;林昌健. 316L不锈钢焊缝腐蚀行为的电化学研究 [J]. , 2013, 31(5-6): 25-28.
[13]
唐世春;张志宏;张江江. 塔河油田点蚀测试及评价技术应用 [J]. , 2013, 31(32): 42-48.
[14]
邹士文;肖葵;董超芳;丁康康;李晓刚. 空间站环境控制与生命保障系统微生物腐蚀行为与控制方法 [J]. , 2013, 31(30): 61-66.
[15]
魏丹;肖葵;陈长风;李晓刚. 碳钢在含Cl- 和SO4 2- 碱性溶液中腐蚀规律的局部交流阻抗 [J]. , 2013, 31(20): 43-47.