Abstract：The PANI film anodes are prepared by the potentiostatic method, the pulse polarization and the cyclic voltammetry (CV), and are applied in a fixed bed microbial fuel cell to investigate the performances of the electricity generation and the wastewater treatment, respectively. It is shown that the PANI film anode modified by the CV enjoys the best conductivity, as compared with those obtained by the potentiostatic method and the pulse polarization, and the electrode resistance is greatly decreased from 55.45 Ω of that prepared by the potentiostatic method to 3.65 Ω. The PANI film anode prepared by the CV is applied in the MFC, the maximum power density and the open circuit voltage reach 215.6 mW·m-2 and 849.3 mV, respectively, 50.6% and 45.1% higher than those of the PANI film anode modified by the potentiostatic method. Compared with the potentiostatic method and the pulse polarization, with the CV being used to modify the PANI film anode, the MFC startup time can be shortened, the electrical stability increased and the sewage removal rate improved. It is a new way to prepare the high performance anode for the MFC.
綦琪, 王许云, 何海波, 贾云. 微生物燃料电池聚苯胺膜阳极的制备及性能[J]. 科技导报, 2015, 33(14): 82-86.
QI Qi, WANG Xuyun, HE Haibo, JIA Yun. Preparation and performance of PANI film anodes for MFC. Science & Technology Review, 2015, 33(14): 82-86.
[1] Liu D, Liu J H, Liu H Z. Research and progress of microbial fuel cells[J]. Journal of Chemical Industry & Engineering, 2007, 28(5): 26-28.
[2] Logan B E, Hamelers B, Rozendal R, et al. Microbial fuel cells: Methodology and technology[J]. Environmental Science & Technology, 2006, 40(17): 5181-5192.
[3] Liu H, Ramnarayanan R, Logan B E. Production of electricity during wastewater treatment using a single chamber microbial fuel cell[J]. Environmental Science & Technology, 2004, 38(7): 2281-2285.
[4] Cao X X, Fan M Z, Liang P, et al. Effects of anode potential on the electricity generation performance of geobacter sulfurreducens[J]. Chemical Journal of Chinese Universities, 2009, 30(5): 983-987.
[5] 郑聪聪, 郭庆杰, 王许云, 等. MFC聚苯胺碳纳米管阳极电化学法制 备及其性能[J]. 化工学报, 2012, 63(5): 1559-1606. Zheng Congcong, Guo Qingjie, Wang Xuyun, et al. Preparation and performance of graphite anode modified electrochemically by polyaniline and carbon nanotubes for MFC[J]. CIESC Journal, 2012, 63 (5): 1599-1606.
[6] 迟美玲. 提高微生物燃料电池性能的电极材料研究[D]. 天津: 南开大 学,2011. Chi Meiling. Study on the electrode materials to improve the performances of microbial fuel cells[D]. Tianjin: Nankai University, 2011.
[7] 刘兴倩, 王许云, 郭庆杰. PEDOT/MWCNTs复合阳极的制备及在MFC 中的应用[J]. 化工学报, 2013, 64(5): 1773-1779. Liu Xingqian, Wang Xuyun, Guo Qingjie. Preparation and application of PEDOT/MWCNTs composite anode for MFC[J]. CIESC Journal, 2013, 64(5): 1773-1779.
[8] Hou L B, Jia M Q, Hu G. Preparation of polyaniline electrochemical films and their properties[J]. Journal of Beijing University of Chemical Technoligy, 2004, 31(4), 65-69.
[9] Wen J B, Zhou H H, Li S L, et al. Growth process of nano-fibrous polyaniline film on stainless steel[J]. Acta Physico-Chimica Sinica, 2006, 22(1): 106-109.
[10] Chen Z P, Chu D B, Chen J H, et al. Influence of scanning modes of cyclic voltammetry on the surface morphology of polyaniline films[J]. Acta Polymerica Sinica, 2007, 7(6): 536-540.
[11] Zhao S J, Guo Q J, Wang X Y, et al. Electricity generation using an anaerobic fluidized bed microbial fuel cell[J]. Journal of Environmental Sciences, 2010, 30(3): 513-518.
[12] Cai L T, Yao S B, Zhou S M. The effects of magnetic field on the electro polymerization of aniline[J]. Electrochemistry, 1995, 1(2): 159- 165.
[13] Fu Y, Ma J B. Electropolymerization of polyanline by potentiostatic method and its electrochemical behavior[J]. Chemical Research and Application, 1998, 10(2): 133-137.
[14] Long J M, Wang S L, Wang J. Preparation of conductive polyaniline film on stainless steel by electrochemical polymerization[J]. Journal of Materials Protection, 2003, 36(12): 23-26.
2015, Vol. 33 
