Abstract:The basic performance of bismaleimide resin and the importance of toughening modification are reported in the paper. The methods of modification are reviewed, including allyl compounds modification, binary amine modification, combination of epoxy resin, high performance thermoplastic resin modification, cyanate ester resin modification, synthesis of new type bismaleimide resin, rubber modification, inorganic filler modification, liquid crystal modification, nanometer material modification, fexible material modification, etc. The mechanism of modification is depicted, such as addition reaction, Diels-Alde reaction, oligomerization reaction, Michael addition reaction, copolymerization reaction, crack mechanism of screw anchor, and half interpenetrating network mechanism. Besides, new advancement of the research is discussed.
[1] 梁正国, 顾媛娟. 双马来酰亚胺树脂[M]. 北京: 化学工业出版社, 1997. Liang Guozheng, Gu Yuanjuan. Bismaleimide resin[M]. Beijing: Chemical Industry Press, 1997.
[2] 王汝敏, 舒武炳. 韧性双马来酰亚胺树脂基复合材料的研究[J]. 纤维复合材料, 2000, 3(30): 53-56. Wang Rumin, Shu Wubing. Research of toughened bismaleimide resin composites[J]. Fiber Composites, 2000, 3(30): 53-56.
[3] 胡利红. 双马来酰亚胺树脂的增韧改性研究[D]. 南昌: 南昌航空大学, 2012. Hu Lihong. Study on the toughening of bismaleimide resins[D]. Nanchang: Nanchang Hangkong University, 2012.
[4] 周其凤, 范星河, 谢晓峰. 耐高温聚合物及其复合材料[M]. 北京: 化学工业出版社, 2004. Zhou Qifeng, Fan Xinghe, Xie Xiaofeng. The high temperature polymers and its composites[M]. Beijing: Chemcal Industry Press, 2004.
[5] 刘元镛, 许爱荣, 宁荣昌. 改性BMI/DPA和CTBN增韧环氧树脂的温度力学性能及本构关系研究[J]. 航空材料学报, 1999, 19(4): 44-51. Liu Yuanyong, Xu Airong, Ning Rongchang. Study of temperature and mechanical properties and constitutive equation for modified BMI/DPA and CTBN toughened epoxy[J]. Journal of Aeronautical Materials, 1999, 19(4): 44-51.
[6] 张宝艳, 李萍, 陈祥宝. 新型改性剂对PEK-C改性的BMI树脂体系性能的影响[J]. 材料导报, 1998, 12(4): 69-71. Zhang Baoyan, Li Ping, Chen Xiangbao. Influences of novel modifier on properties of PEK-C modified BMI system[J]. Materials Review, 1998, 12(4): 69-71.
[7] Qu C, Zhao L, Wang D, et al. Bis [4-(4-maleimidephen-oxy) phenyl] propane/N, N-4, 4′-bismaleimidodiphenylmethyene blend modified with diallyl bisphenol A[J]. Journal of Applied Polymer Science, 2014, 131 (12): 40395.
[8] 孟涛, 李玲, 董风云. 双马来酰亚胺树脂的增韧改性研究[J]. 化学与黏合, 2005, 27(1): 43-45. Meng Tao, Li Ling, Dong Fengyun. Study on toughening and modifying of bismaleimide resin[J]. Chemistry and Adhesion, 2005, 27(1): 43-45.
[9] 王汝敏. 双马/二元胺/环氧体系的组成对性能的影响[J]. 高分子科学与工程, 1997, 13(3): 73-78. Wang Rumin. Influence of composition on properties in diamine and epoxy resin modified bismalemide systems[J]. Polmer Materials Science & Engineering, 1997, 13(3): 73-78.
[10] 王洪波, 周浩然, 徐双平. 二元胺/环氧树脂增韧BMI树脂的研究[J]. 哈尔滨理工大学学报, 2005, 10(5): 88-90. Wang Hongbo, Zhou Haoran, Xu Shuangping. Preparation and characterzation of BMI/DA/EP system[J]. Journal of Harbin University of Science and Technology, 2005, 10(5): 88-90.
[11] 华勇. 双马来酰亚胺树脂的改性研究[J]. 郑州工业高等专科学校学报, 2001, 17(4): 19. Hua Yong. Research on modified BMI resin[J]. Journal of Henan University of Technology, 2001, 17(4): 19.
[12] 李四红, 李玲, 张续柱. 双马来酰亚胺树脂增韧改性研究进展[J]. 粘接, 2004, 25(2): 33-35. Li Sihong, Li Ling, Zhang Xuzhu. Advance in research on toughening modification of bismaleimide resin[J]. Adhesion in China, 2004, 25(2):33-35.
[13] Naffakh M, Dumon M, Gérard J F. Study of a reactive epoxy-amine resin enabling in situ dissolution of thermoplastic films during resin transfer moulding for toughening composites[J]. Composites Science and Technology, 2006, 66(10): 1376-1384.
[14] 乔海涛, 张宝艳, 包建文, 等. 高韧性双马树脂基胶黏剂的研制[C]// 第17届全国复合材料学术会议论文集, 2012: 491-494. Qiao Haitao, Zhang Baoyan, Bao Janwen, et al. Development of highly toughened BMI adhesive[C]// The 17th National Co-ference on Composite Materials, 2012: 491-494.
[15] 张宝艳, 陈祥宝, 李敏, 等. 碳纤维增强双马来酰亚胺树脂基复合材料体系冲击后压缩强度研究[J]. 航空材料学报, 2002, 22(1): 36-40. Zhang Baoyan, Chen Xiangbao, Li Min, et al. Investigation on compression strength after impact of carbon fiber reinforced bismaleimide resin matrix composites[J]. Journal of Aeronautical Materials, 2002, 22(1): 36-40.
[16] 程雷, 王汝敏, 杨绍昌, 等. PES 改性低温固化双马树脂固化动力学研究[J]. 中国胶粘剂, 2009, 18(12): 13-16. Cheng Lei, Wang Rumin, Yang Shaochang, et al. Study on curing reaction kinetics of low temperature curable BMI moified by PES[J]. China Adhesives, 2009, 18(12): 13-16.
[17] 刘刚, 刘奇涛, 凌辉, 等. 聚醚酰亚胺对共聚双马树脂的增韧作用[J]. 中国胶粘剂, 2008, 17(4): 6-9. Liu Gang, Liu Qitao, ect. Toughness of polyetherimide on copolymeric bismaleimide resin[J]. China Adhesives, 2008, 17(4): 6-9.
[18] 张宝艳, 李敏, 陈祥宝. 树脂配制方法的改进对双马树脂及预浸料性能影响[J]. 航空材料学报, 2007, 27(6): 59-63. Zhang Baoyan, Li Min, Chen Xiangbao. Influence of resin mixing process on the properties of BMI resin and prepreg[J]. Journal of Aeronautical Materials, 2007, 27(6): 59-63.
[19] 安学峰, 张晨乾. PES颗粒层间增韧碳纤维/双马树脂RTM复合材料[J]. 复合材料学报, 2013, 30: 65-69. An Xuefeng, Zhang Chenqian. CF/BMI RTM composite materials toughened by interlayers of PES particle[J]. Acta Matriae Compositae Sinica, 2013, 30: 65-69.
[20] 李文峰, 王国建. 氰酸酯/双马来酰亚胺共固化树脂[J]. 材料导报, 2008, 22(7): 39-43. Li Wenfeng, Wang Guojian. Cyanate ester/bismaleimide co-cured resins[J]. Materials Review, 2008, 22(7): 39-43.
[21] Scola D A, Vontell J, Felsen M. Effects of ambient aging of 5245C/ graphite prepreg on composition and mechanical properties of fabricated composites[J]. Polymer Composites, 1987, 8(4): 224.
[22] Barton J M, Hamerton I, Jones J R. The synthesis, characterisation and thermal behaviour of functionalised aryl cyanate ester monomers[J]. Polymer international, 1992, 29(2): 145-156.
[23] Hamerton I, Herman H, Mudhar A K, et al. Multivariate analysis of spectra of cyanate ester/bismaleimide blends and corre-lations with properties[J]. Polymer, 2002, 43(11): 3381-3386.
[24] 陈祥宝. 高性能树脂基体[M]. 北京: 化学工业出版社, 1998. Chen Xiangbao. High performance resins[M]. Beijing: Chemical Industry Press, 1998.
[25] 赵渠森, 王京城. QY8911-III高韧性双马来酸亚胺树脂及其复合材料性能研究[J]. 航空工艺技术, 1995, 5: 3-8. Zhao Qusen, Wang Jingcheng. Research on QY8911-III high toughness BMI resin and its composite perform ance[J]. Aeronautical Manufacturing Technology, 1995, 5: 3-8.
[26] 宁志强. 双马来酰亚胺树脂的增韧改性研究[J]. 化学与黏合, 2007, 29(5): 346. Li Zhiqiang. Research on toughening modification of bismaleimide resin[J]. Chemistry and Adhesion, 2007, 29(5): 346.
[27] 雷勇, 荆晓东, 江璐霞. 橡胶增韧双马来酰亚胺树脂的研究[J]. 化工新型材料, 2001, 29(2): 26-29. Lei Yong, Jing Xiaodong, Jiang Luxia. Study on toughening bismaleimide with CTBN rubber[J]. New Chemical Materials, 2001, 29 (2): 26-29.
[28] 袁莉, 贾巧英, 马晓燕, 等. 晶须改性二苯甲烷型双马来酰亚胺树脂体系复台材料的研究[J]. 化工新型材料, 2013, 31(11): 34-36. Yuan Li, Jia Qiaoying, Ma Xiaoyan, et al. Study of whiskers modified bismaleimide /O,O'-diallybisphenol composites[J]. New Chemical Materials, 2013, 31(11): 34-36.
[29] 闰梨, 黄英, 赵大为. 增韧改性方法对双马来酰亚胺树脂性能的影响[J]. 材料导报, 2008, 22: 358-360. Yan Li, Huang Ying, Zhao Dawei. Effect of toughening modification on properties of Bismaleimide Resins[J]. Material Review, 2008, 22: 358-360.
[30] 宁志强, 徐晓沐. 双马来酰亚胺树脂的增韧改性研究[J]. 化学与黏合, 2007, 29(5): 345-346. Ning Zhiqiang, Xu Xiaomu. Research on toughening modification of bismaleimide resin[J]. Chemistry and Adhesion, 2007, 29(5): 345-346.