壳层增强人造硅酸盐骨料性能

doi:10.3981/j.issn.1000-7857.2014.25.003

摘要
图/表
参考文献
相关文章 (1)

全文: PDF (3325 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要壳层人造硅酸盐骨料是具有结构梯度和成分梯度的复合结构，内核为基体，壳层为增强相。壳层和内核通过水化产物的相互渗透、相互搭接在界面处融为一个整体，界面结合牢固。对不同掺量的砂加气混凝土（SAAC）粉末和粉煤灰加气混凝土（FAAC）粉末制备的硅酸盐骨料进行对比，发现壳层结构可提高人造硅酸盐骨料的筒压强度，壳层结构对SAAC系列骨料的筒压强度提高幅度达49.72%~80.50%；对FAAC系列骨料的筒压强度提高幅度为15.30%~25.74%。壳层与内核的最佳质量比为1：25，此时壳层厚度为68.09 μm，制备的壳层人造硅酸盐骨料的筒压强度比无壳时提高约25%。在砂浆基体相同，粗骨料体积份数相等的情况下，人造硅酸盐骨料混凝土比普通混凝土的抗压强度低6.38%，表观密度低20.74%，具有轻质高强的性能。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	杨秀丽
	崔崇
	崔晓昱
	贾建平
	朱志萍

关键词 ：人造硅酸盐骨料, 壳层结构, 轻骨料混凝土

Abstract：The artificial silicate aggregate has a gradational structure with a compositional gradient. This paper discusses the shell structure reinforced composite based silicate aggregate core. The interface between the shell and the core nakes them to form a whole by the hydration product overlap. The performances of the SAAC aggregate and the FAAC aggregate are compared, and it is shown that the shell structure could improve the cylinder compressive strength (CCS) of the artificial silicate aggregate. The CCS of the SAAC aggregate is enhanced by 49.72%-80.50%, and the CCS of the FAAC aggregate is enhanced by 15.30%-25.74% with the shell structure. The best weight ratio of the shell and the core is 1:25, with shell thickness of 68.09 μm. The CCS of the artificial silicate aggregate with the shell structure is enhanced by about 25% as compared with that without the shell structure. Compared the silicate aggregate concrete with the ordinary concrete in the same level mortar and volume of the aggregate, it is shown that the compressive strength of the silicate aggregate concrete is 6.38% lower than the ordinary concretes, and the apparent density of the silicate aggregate concrete is 20.74% lower than the ordinary concrete.

Key words： artificial silicate aggregate shell structure lightweight concrete

收稿日期: 2014-04-21

ZTFLH:

TU599

基金资助:国家科技重大专项（2012ZX04010032）；江苏省普通高校研究生科研创新计划项目（CXZZ11-0243）

通讯作者: 崔崇，教授，研究方向为无机非金属材料，电子信箱：cuichong@njust.edu.cn E-mail: cuichong@njust.edu.cn

作者简介: 杨秀丽，博士研究生，研究方向为无机非金属材料，电子信箱：jkyxl@126.com

引用本文:

杨秀丽, 崔崇, 崔晓昱, 贾建平, 朱志萍. 壳层增强人造硅酸盐骨料性能[J]. 科技导报, 2014, 32(25): 26-31.
YANG Xiuli, CUI Chong, CUI Xiaoyu, JIA Jianping, ZHU Zhiping. Properties of Shell Reinforced Artificial Silicate Aggregate. journal1, 2014, 32(25): 26-31.

链接本文:

http://www.kjdb.org/CN/10.3981/j.issn.1000-7857.2014.25.003 或 http://www.kjdb.org/CN/Y2014/V32/I25/26

[1] Shafigh P, Jumaat M Z, Mahmud H. Oil palm shell as a lightweight aggregate for production high strength lightweight concrete[J]. Construction and Building Materials, 2011, 25(4): 1848-1853.
[2] Weigler H, Karl S. Structural lightweight aggregate concrete with reduced density-lightweight aggregate foamed concrete[J]. International Journal of Cement Composites and Lightweight Concrete, 1980, 2(2): 101-104.
[3] Gunasekaran K, Kumar P S, Lakshmipathy M. Mechanical and bond properties of coconut shell concrete[J]. Construction and Building Materials, 2011, 25(1): 92-98.
[4] 章金骏. 污泥烧制陶粒的技术路径与控制因子研究[D]. 杭州: 浙江大学, 2012. Zhang Jinjun. Characteristics and sintering technology of sewage sludge ceramsite[D]. Hangzhou: Zhejiang University, 2012.
[5] 王慧萍, 黄劲, 丁庆军, 等. 利用污泥和粉煤灰生产高强优质轻集料的研究[J]. 武汉理工大学学报: 材料科学版, 2004, 26(7): 38-40. Wang Huiping, Huang Jin, Ding Qingjun, et al. Study on high performance lightweight aggregate manufactured by sludge and fly ash[J]. Journal of Wuhan University of Technology: Materials Science Edition, 2004, 26(7): 38-40.
[6] 邹志祥. 粉煤灰免烧轻集料的制备及其路基强度的实验研究[D]. 淮南: 安徽理工大学, 2007. Zou Zhixiang. Experimental study on preparation of coal ash lightweight aggregate and its roadbed strength tests[D]. Huainan: Anhui University of Science and Technology, 2007.
[7] 谢宁. 真空挤压制备免烧型粉煤灰陶粒的工艺研究[D]. 太原: 太原理工大学, 2009. Xie Ning. Research on the process for making non-sintering fly ash ceramisite by vacuum extrsion[D]. Taiyuan: Taiyuan University of Technology, 2009.
[8] Ma H, Cui C, Li X, et al. Study of high performance autoclaved shellaggregate from propylene oxide sludge[J]. Construction and Building Materials, 2011, 25(7): 3030-3037.
[9] Ma H, Cui C, Li X, et al. Mechanical properties of autoclaved shellaggregate[ J]. Journal of Wuhan University of Technology: Materials Science Edition, 2011, 26(4): 723-729.
[10] 贺智敏, 龙广成, 谢友均, 等. 蒸养混凝土的毛细吸水特性研究[J]. 建筑材料学报, 2012, 15(2): 190-195. He Zhimin, Long Guangcheng, Xie Youjun, et al. Water sorptivity of steam curing concrete[J]. Journal of Building Materials, 2012, 15(2): 190-195.
[11] 葛勇, 孔丽娟, 张宝生, 等. 陶粒对混凝土结构及毛细吸水性能的影响[J]. 硅酸盐学报, 2008, 36 (7): 934-938. Ge Yong, Kong Lijuan, Zhang Baosheng, et al. Effects of aglite on structure and capillary water absorption property of concree[J]. Journal of the Chinese Ceramic Society, 2008, 36(7): 934-938.
[12] Tandngw A, Lynsdalecl, Crippsj C. Aggregarecement chemical interactions[J]. Cement Concrete Research, 1998, 28(7): 1037-1048.
[13] de Larrard F, Belloc A. The influence of aggregate on the compressive strength of normal and high-strength concrete[J]. ACI Materials Journal, 1997, 94(5): 417-424.
[14] Stroeven P, Stroeven M. Reconsrructions by space of the interfacial transition zone[J]. Cement Concrent Composites, 2001, 23(2): 189-200.
[15] 陈伟. 轻集料-基体协同作用对混凝土性能的影响[D]. 重庆: 重庆大学, 2013. Chen Wei. Synergic acttion of lightweight aggregate-matrix on performance of concrete[D]. Chongqing: Chongqing University, 2013.