Research progress of 3D printing orthopedic insoles
MA Lifang1,2, WANG Lichao3, LI Jian4, TAO CHunjing1, ZHANG Ming5, FAN Yubo1
1. School of Biological Science and Medical Engineering, School of Medical Technology and Engineering, Beijing Advanced Innovation Center for Biomedical Engineering, Beihang University, Beijing 100083, China;
2. Beijing Key Laboratory of Rehabilitation Technical Aids for Old-Age Disability, National Research Center for Rehabilitation Technical Aids, Beijing 100176, China;
3. Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin 150040, China;
4. School of Automation, Beijing University of Posts and Telecommunications, Beijing 100876, China;
5. Biomedical Engineering Department, the Hong Kong Polytechnic University, Hong Kong 999077, China
Abstract：Compared with the traditional manufacturing methods of orthopedic insoles, 3D printing orthopedic insoles are intensive and efficient. However, there are still some problems in design, printing, materials and so on, and there is a lack of systematic research review. Based on the manufacturing methods of orthopedic insoles, this paper summarizes the printing technology, printing materials and research status of 3D printing orthopedic insoles, and analyzes the existing problems in the research of 3D printing orthopedic insoles. The future development trend of 3D printing orthopedic insoles is forecasted in terms of the improvement of orthopedic insoles performance and the development of modern science and technology.
马俪芳, 王立朝, 李剑, 陶春静, 张明, 樊瑜波. 3D打印矫形鞋垫研究进展[J]. 科技导报, 2022, 40(13): 57-64.
MA Lifang, WANG Lichao, LI Jian, TAO CHunjing, ZHANG Ming, FAN Yubo. Research progress of 3D printing orthopedic insoles. Science & Technology Review, 2022, 40(13): 57-64.
[1] 张春青, 王越, 孙惠丽, 等. 医用康复器械分类管理探讨分析和展望[J]. 中国医疗器械杂志, 2017, 41(5): 365- 368.
[2] 姜缪文. 3D打印和数值模拟技术在足底矫形器中的应用研究[D]. 北京: 北京工业大学, 2018.
[3] 刘昊. 试谈3D打印技术在康复矫形器研发中的应用[J]. 中阿科技论坛, 2020(1): 124-127.
[4] 曹萍, 吴小高. 3D打印技术在矫形鞋垫中的应用进展[J]. 中国康复理论与实践, 2015, 21(7): 753-756.
[5] Xu R, WanG Z H, Ren Z X, et al. Comparative study of the effects of customized 3D printed insole and prefabricated insole on plantar pressure and comfort in patients with symptomatic flatfoot[J]. Medical Science Monitor: International Medical Journal of Experimental and Clinical Research, 2019, 25(12): 3510-3519.
[6] Saltzman C L, Nawoczenski D A. Complexities of foot architecture as a base of support[J]. The Journal of Orthopaedic and Sports Physical Therapy, 1995, 21(6): 354- 360.
[7] Su S, Mo Z J, Guo J C, et al. The effect of arch height and material hardness of personalized insole on correction and tissues of flatfoot[J]. Journal of Healthcare Engineering, 2017, 2017: 8614341.
[8] 俞沁圆, 陈怡梅. 儿童矫形鞋垫设计应用与发展[J]. 世界最新医学信息文摘, 2016, 16(2): 206-207.
[9] 刘巍, 吴会东, 敖丽娟. 矫形鞋垫治疗足底筋膜炎的机制及临床研究进展[J]. 中国康复, 2018, 33(2): 166-169.
[10] 郭悦, 李剑, 张海涛, 等. 矫形鞋垫用于改善小儿脑瘫足部畸形的研究现状[J]. 足踝外科电子杂志, 2020, 7(1): 6-11.
[11] 汤运启, 王幽幽, 秦蕾, 等. 矫形鞋垫的设计与制作[J]. 中国皮革, 2015, 44(16): 39-43.
[12] 罗时杰. 基于3D打印的矫形器数字化制造研究[D]. 西安: 西安工程大学, 2019.
[13] 杨宗宇, 刘非, 崔亮, 等. 3D打印矫形鞋垫治疗平足的疗效观察[J]. 足踝外科电子杂志, 2017, 4(1): 37-38, 41.
[14] 张强, 曹杰, 莫中军. 3D打印技术在康复矫形器研发中的应用[J]. 中国设备工程, 2019(22): 153-154.
[15] 陈小艺. 基于TPU材料3D打印结构的缓冲性能研究[D]. 天津: 天津科技大学, 2019.
[16] 陈薇薇, 张国锋, 陈育宏, 等. 3D打印减压鞋垫在糖尿病足防治中的临床应用[J]. 同济大学学报(医学版), 2018, 39(6): 76-81.
[17] 王向前, 高汉义, 王金武, 等. 下肢不等长患者的3D打印矫形鞋垫的设计与应用[J]. 生物医学工程研究, 2020, 39(4): 397-400.
[18] Dikobe D G, Luyt A S. Thermal and mechanical properties of PP/HDPE/wood powder and MAPP/HDPE/wood powder polymer blend composites[J]. Thermochimica Acta, 2017, 654: 40-50.
[19] Salles A S, Gyi D E. An evaluation of personalised insoles developed using additive manufacturing[J]. Journal of Sports Sciences, 2013, 31(4): 442-450.
[20] 孙祁, 张一弛. 3d打印技术及材料在假肢矫形器领域的应用[J]. 技术与市场, 2020, 27(10): 38-39.
[21] Ballard D H, Trace A P, Ali S, et al. Clinical applications of 3D printing: primer for radiologists[J]. Academic Radiology, 2018, 25(1): 52-65.
[22] 刘震, 张盘德, 容小川, 等. 脑卒中踝足矫形器的3D打印研究[J]. 中国康复医学杂志, 2017, 32(8): 874-878.
[23] 黄楚红. 复合式腕手矫形器对卒中后腕手功能障碍的疗效及3D打印腕手矫形器的研发[D]. 广州: 南方医科大学, 2020.
[24] Chen Y J, Lin H, Zhang X D, et al. Application of 3Dprinted and patient-specific cast for the treatment of distal radius fractures: initial experience[J]. 3D Printing in Medicine, 2017, 3(1): 11.
[25] 李鹏. 基于3D打印扁平足个性化矫正鞋垫的设计及其对平衡能力的影响[D]. 苏州: 苏州大学, 2017.
[26] Telfer S, Munguia J, Pallari J, et al. Personalized foot orthoses with embedded temperature sensing: Proof of concept and relationship with activity[J]. Medical Engineering & Physics, 2014, 36(1): 9-15.
[27] Liu Z B, Zhang M, Bhandari B, et al. 3D printing: Printing precision and application in food sector[J]. Trends in Food Science & Technology, 2017, 69: 83-94.
[28] Blaya F, Pedro P S, Silva J L, et al. Design of an orthopedic product by using additive manufacturing technology: The arm splint[J]. Journal of Medical Systems, 2018, 42(3): 54.
[29] 廖政文, 莫诒向, 张国栋, 等. 3D打印个性化康复矫形器的设计制作[J]. 中国医学物理学杂志, 2018, 35(4): 470-477.
[30] 岳敏, 李红伟, 李海燕. 3D打印在弹性体领域的应用[J]. 橡胶工业, 2019, 66(10): 795-798.
[31] Bulota M, Budtova T. PLA/algae composites: Morphology and mechanical properties[J]. Composites Part A: Applied Science and Manufacturing, 2015, 73: 109-115.
[32] 朱思尧, 李涤尘, 汤磊, 等. 具有梯度模量的3D打印糖尿病鞋垫设计[J]. 医用生物力学, 2021, 36(1): 102-109.
[33] Cha Y H, Lee K H, Ryu H J, et al. Ankle-foot orthosis made by 3D printing technique and automated design software[J]. Applied Bionics and Biomechanics, 2017, 2017: 9610468.
[34] Bi H J, Xu M, Ye G Y, et al. Mechanical, thermal, and shape memory properties of three-dimensional printing biomass composites[J]. Polymers, 2018, 10(11): 1234.
[35] Tao Y, Shao J, Li P, et al. Application of a thermoplastic polyurethane/polylactic acid composite filament for 3D-printed personalized orthosis[J]. Materiali in Tehnologije, 2019, 53(1): 71-76.
[36] Virginija A, Bekzan L, Aiste P, et al. Silicone rubber and microcrystalline cellulose composites with antimicrobial Properties[J]. Materials Science-Medziagotyravl, 2014, 20(1): 42-49.
[37] Shahar F S, Hameed Sultan M T, Lee S H, et al. A review on the orthotics and prosthetics and the potential of kenaf composites as alternative materials for anklefoot orthosis[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2019, 99: 169-185.
[38] 熊宝林, 周大伟, 徐静, 等. 3D打印在假肢矫形器技术领域的应用前景初探[J]. 中国康复, 2018, 33(6): 523- 525.
[39] Gibson I, Shi D P. Material properties and fabrication parameters in selective laser sintering process[J]. Rapid Prototyping Journal, 1997, 3(4): 129-136.
[40] Lin H, Shi L, Wang D F. A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast[J]. 3D Printing in Medicine, 2015, 2(1): 4.
[41] 焦艳霞, 周宇涵, 刘阿敏, 等. 不同生物质复合材料3D打印成型及其性能对比[J]. 广州化学, 2019, 44(5): 52- 56.
[42] 赵莹雪, 刘世忠. 3D打印儿童矫形鞋垫服务设计研究[J]. 创意设计源, 2016(3): 67-72.
[43] 高翔. 纤维素材料在3D打印中的应用现状和研究思路[J]. 科技创新与生产力, 2020(7): 56-58, 62.
[44] 刘宇鹏. ” 智能化” 未来趋势是什么?院士:新一代人工智能须变革研究范式[EB/OL]. [2021-08-08]. https://baijiahao.baidu.com/s?id=1685234590140059875&wfr=spider&for=pc.
2022, Vol. 40 
