Heat Transfer Characteristics of Spray Cooling with High Heat Flux Dissipation
MA Tengyue1,2, CHENG Wenlong1, LIU Qinie1,3
1. Department of Thermal Science and Energy Engineering, University of Science and Technology of China, Hefei 230027, China;2. Northwest Institute of Nuclear Technology, Xi'an 710024, China;3. Hefei General Machinery Reseach Institute, Hefei 230088, China
Abstract:A closed loop experimental device of spray cooling is designed and constructed based on high heat flux dissipation. Hot surface heat flux is calculated by thermocouple; spray distribution of nozzle and grain diameter and size are measured by PDA. A mathematical model of spray cooling is presented based on bubble dynamics and heat transfer. The results of numerical simulation show the relationship between the spray height and the spray cooling curve. With the spray height increasing, the spray cooling heat transfer capacity is enhanced, consisting with the same trend by experiment. The heat transfer coefficients in different spray angle, pressure, and height are presented, and the spray cooling heat transfer characteristics are analyzed. The conclusion is that the spray cooling heat transfer capacity in two phase region is significantly enhanced, and spray cooling has an optimal spray height.
马腾跃;程文龙;刘期聂;. 喷雾冷却高热流密度散热传热特性研究[J]. , 2012, 30(21): 34-37.
MA Tengyue;CHENG Wenlong;LIU Qinie;. Heat Transfer Characteristics of Spray Cooling with High Heat Flux Dissipation. , 2012, 30(21): 34-37.