研究论文

一种测定CO2驱最小混相压力的实验新方法

  • 赵金省;刘笑春;杨棠英;张涛
展开
  • 1. 西安石油大学石油工程学院,西安 710065;2. 长庆油田公司油气工艺研究院,西安 710061

收稿日期: 2012-11-07

  修回日期: 2013-03-05

  网络出版日期: 2013-05-28

A New Method for Predicting the CO2 Flooding Minimum Miscibility Pressure

  • ZHAO Jinsheng;LIU Xiaochun;YANG Tangying;ZHANG Tao
Expand
  • 1. College of Petroleum Engineering, Xi'an Shiyou University, Xi'an 710065, China;2. Oil & Gas Technology Research Institute of Changqing Oilfield Company, Xi'an 710061, China

Received date: 2012-11-07

  Revised date: 2013-03-05

  Online published: 2013-05-28

摘要

为了缩短最小混相压力的测试时间,根据界面张力消失原理,提出了一种可以快速确定最小混相压力的实验新方法。该方法主要是利用可旋转的活塞式高压配样器,通过测定原油和CO2混合过程中的压力变化来确定最小混相压力。利用该方法对华庆长6储层的原油与CO2的最小混相压力进行测试,并与细管法测试结果进行对比,结果表明,测试结果与细管法的测试结果较接近,且该方法具有操作简单、实验过程耗时较短的特点。

本文引用格式

赵金省;刘笑春;杨棠英;张涛 . 一种测定CO2驱最小混相压力的实验新方法[J]. 科技导报, 2013 , 31(15) : 56 -58 . DOI: 10.3981/j.issn.1000-7857.2013.15.009

Abstract

In order to reduce the test time of MMP, according to the principle of interfracial tension disappearing, a new experimental method which is able to quickly determine the MMP is developed. In the experimental method, the main equipment is a rotatable high pressure piston-typed sample preparation container. In order to determine the MMP, the pressure when the oil is mixed with CO2 is measured. Using the test method of two-phase contact process, the CO2 MMP of reservoir oil in Chang six of Huaqing has been measured. Comparing with the test result of slim tube test, the MMP result based on two-phase contact process is very closed to the result based on slim tube test. The test method of two-phase contact process possesses features of both simple operation and short test time period.
文章导航

/