为解决快速扩散制造中工艺调整方案的选择问题, 分析工艺调整对扩散制造产生的多种影响, 通过关系矩阵和基于实例搜索的方法定量计算影响值;在主制企业对影响值提出的约束基础上, 采用多维关联函数的方法, 通过点位置判断和降维计算等过程计算得到符合影响约束范围内调整工艺;以某型叶片的调整工艺方案选择分析为例, 计算得到主制企业期望的工艺方案, 验证了本方法的适用性和可行性。
Aimed at selection and analysis of technology adjustment scheme in rapid proliferating manufacturing, the influence of adjustment technology on proliferation manufacturing is analyzed, and the relationship matrix and case-based reasoning are introduced to quantize the influence. Then, based on the constraint value of influence, judging point location, and reducing dimension, adjustment technology which meets the demand of main enterprises is generated by using multidimensional correlation function. Finally, the effectiveness of the proposed method is verified by the selection and analysis of technology adjustment scheme for a certain type of blade.
[1] 赵岩, 莫蓉. 面向快速扩散制造的逻辑生产线设计关键技术研究[J]. 计算机集成制造系统, 2009, 15(7): 1270-1278. Zhao Yan, Mo Rong. Key techniques for logic production line design oriented to the rapid extended manufacturing[J]. Computer Integrated Manufacturing Systems, 2009, 15(7): 1270-1278.
[2] 刘娇剑. 支持快速扩散制造的工艺扩散关键技术研究[D]. 南京: 南京 航空航天大学, 2009. Liu Jiaojian The diffusion research key technologies supporting rapid extended manufacturing[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2009.
[3] 俞烽, 廖文和, 谢亚楠, 等. 扩散工艺调整模型研究[J]. 计算机集成制 造系统, 2008, 14(12): 2322-2327. Yu Feng, Liao Wenhe, Xie Yanan, et al. Proliferative process ajustment model[J]. Computer Integrated Manufacturing Systems, 2008, 14(12): 2322-2327.
[4] 高世文. 武器装备快速扩散制造系统及关键技术研究[D]. 南京: 南京 航空航天大学, 2010. Gao Shiwen. The rapid extended manufacturing system and its key technology research of weapons[D]. Nanjing: Nanjing University of Aeronautics and Astronautics, 2010.
[5] 王际坤, 魏法杰. 工程变更影响分析与评估研究[J]. 工业工程, 2006, 9 (3): 32-35, 79. Wang Jikun, Wei Fajie. Analysis and evaluation of the impacts on engineering change [J]. Industrial Engineering Journal, 2006, 9(3): 32-35, 79.
[6] 徐修文, 邱顺流, 宋豫川, 等. 离散制造车间动态事件影响评估方法[J]. 重庆大学学报, 2012(S1): 1-5. Xu Xuiwen, Qiu Shunliu, Song Yuchuan, et al. The assessment methods of discrete manufacturing plant dynamic event impact[J]. Journal of Chongqing University, 2012(S1): 1-5.
[7] Florentin S. Extenics in higher dimensions [M]. Columbus: The Educational Publisher, 2012.