为研究马来酸酐接枝聚乙烯（MAPE）、异丙基三(硬脂酰基)钛酸酯（YB-510）、γ-（2，3-环氧丙氧）丙基三甲氧基硅烷（KH-560）3种偶联剂对稀土荧光竹塑复合材料发光性能、力学性能和热稳定性的影响，利用荧光分光光度计、电子万能试验机、摆锤冲击仪和热重分析仪对复合材料的荧光性能、力学性能和热稳定性进行了表征，并利用场发射扫描电子显微镜（FESEM）对稀土荧光竹塑复合材料的拉伸断面的微观形貌进行观察。结果表明，3种偶联剂都能改善稀土荧光竹塑复合材料的分散性、流动性、发光性能、弯曲强度、弯曲模量、拉伸强度和冲击强度；场发射扫描电镜显示，铝酸锶荧光粉在有偶联剂添加的稀土荧光竹塑复合材料的基体中分散均匀、团聚减少、界面黏合作用改善；相比于钛酸酯（YB-510）和KH-560，MAPE对稀土荧光竹塑复合材料的发光性能、力学性能和分散性提高更明显；热失重（TG）曲线和一阶微分（DTG）曲线分析表明，KH-560提高稀土荧光竹塑复合材料的热稳定性，钛酸酯（YB-510）对稀土荧光竹塑复合材料的热稳定性产生不良影响，MAPE对稀土荧光竹塑复合材料的热稳定性的影响不明显。
In order to investigate the effects of three coupling agents(MAPE, YB-510, KH-560) on the luminescence property, the mechanical property and the thermal stability of the rare earth fluorescent bamboo plastic composites, the fluorescence spectrophotometer, the electronic universal testing machine, the pendulum impact tester and the thermogravimetric analyzer are employed, in addition, the tensile fracture microstructures of the rare earth fluorescent bamboo plastic composites are observed by the field emission scanning electron microscopy(FESEM). The results show that the three coupling agents can improve the dispersion, the fluidity, the luminescence property, the bending strength, the bending modulus, the tensile strength and the impact strength of the rare earth fluorescent bamboo plastic composites. The scanning electron microscopy shows that the dispersibility and the interface bonding of the strontium aluminate phosphor are improved in the composites by using the coupling agent, the birdnesting is decreased too. The MAPE is better in improving the properties of the rare earth fluorescent bamboo plastic composites than the YB-510 and the KH-560. The thermogravimetric(TG) and derivative thermogravimetric(DTG) curves of the rare earth fluorescent bamboo plastic composites indicate that the KH-560 is better to improve the thermal stability of the rare earth fluorescent bamboo plastic composites, the YB-510 has an adverse effect on the thermal stability of the composites, and the MAPE has no effect on the thermal stability of the composites.
[1] Pogreb R,Popov O,Lirtsman V,et al.Luminescent properties of PP and LDPE films and rods doped with the Eu(Ⅲ)-La(Ⅲ) complex[J].Polym Advantechnol,2006(3):20-25.
[2] 李阳,李大纲,徐朝阳,等.纳米纤维素增强聚苯胺复合材料的制备及性能[J].科技导报,2014,32(4/5):65-68.Li Yang,Li Dagang,Xu Chaoyang,et al.Preparation and properties analysis of nanocellulose reinforced polyaniline composites[J].Science & Technology Review,2014,32(4/5):65-68.
[3] 王洪宇,隋国鑫.文冠果壳纤维/高密度聚乙烯复合材料的力学性能[J].科技导报,2014,32(9):21-25.Wang Hongyu,Sui Guoxin.Mechanical properties of xanthoceras sorbifolia husk fibers/high density polyethylene composites[J].Science & Technology Review,2014,32(9):21-25.
[4] Han G,Lei Y,Wu Q,et al.Bamboo-fiber filled high density polyethylene composites:Effect of coupling treatment and nanoclay[J].Journal of Polymers and the Environment,2008,16(2):123-130.
[5] Laurent M M,Raymond T W,John J B,et al.Influence of interfacial on the properties of PVC/cellulosic fiber composites[J].Polymer Composites,1998,19(4):446-455.
[6] Stark N M,Matuana L M,Clemons C M.Effect of processing method on surface and weathering characteristics of wood-flour/HDPE composites[J].Applied Polymer Science,2004,9(3):1021-1030.
[7] 陈国昌,李超勤,刘莉,等.相容剂对聚丙烯/木粉复合材料的影响[J].塑料,2005,34(2):67-69.Chen Guochang,Li Chaoqi,Liu Li,et al.Effects of compatibilizer on polypropylene/wood powder composite[J].Plastics,2005,34(2):67-69.
[8] 于旻,何春霞,刘军军,等.不同表面处理麦秸秆对木塑复合材料性能的影响[J].农业工程学报,2012,28(9):171-177.Yu Min,He Chunxia,Liu Junjun,et al.Effects of differentsurface treatment for wheat straw on performances of wood-plastic composites[J].Transactions of the Chinese Society of Agricultural Engineering(Transactions of the CSAE),2012,28(9):171-177.
[9] 中国国家标准化管理委员会.GB/T 1040-2006塑料拉伸性能试验方法[S].北京:中国标准出版社,2006.China National Standardization Management Committee.GB/T 1040-2006 Plastics-determination of tensile properties[S].Beijing:China Standards Press,2006.
[10] 中国国家标准化管理委员会.GB/T 9341-2008塑料弯曲性能试验方法[S].北京:中国标准出版社,2008.China National Standardization Management Committee.GB/T 9341-2008 Plastics-determination of bending properties[S].Beijing:China Standards Press,2008.
[11] 中国国家标准化管理委员会.GB/T 1043-2008硬质塑料简支梁冲击试验方法[S].北京:中国标准出版社,2008.China National Standardization Management Committee.GB/T 1043-2008 Hard plastic beam impact test method[S].Beijing:China Standards Press,2008.
[12] Wang C,Xuan T,Liu J,et al.Long after glow SrAl2O4:Eu2+,Dy3+phosphors as luminescent down-shifting layer for crystalline silicon solar cells[J].International Journal of Applied Ceramic Technology,2014,12(5):68-73.
[13] Kshatri D S,Mishra S,Khare A.Synthesis of nanocrystalline SrAl2O4:Eu2+,Dy3+phosphor by combustion technique and its luminescent properties[J].Intornational of Journal of Advanced Engineering Research & Technology,2015,13(5):268-273.
[14] Araujo J R,Mano B,Teixeira G M.Biomicrofibrilar composites of high density polyethylene reinforced with curauá fibers:Mechanical,interfacial and morphological properties[J].Composites Science and Technology,2010,70(11):1637-1644.
[15] Donath S,Militz H,Mai C.Wood modification with alkoxysilanes[J].Wood Science and Technol,2004,3(8):555-660.
[16] Xu M,Cai Z.Different modifier on the properties of wood plastic composite impact study[J].Journal of Forestry Research,2004,15(1):77-79.
[17] Tomczak F,Satyanarayana K G,Sydenstricker T H D.Studies on ligno-cellulosic fibers of Brazil PartⅢ:Morphology and properties of Brazilian curauá fibers[J].Composites Part A:Applied Science and Manufactur-ing,2007,3(8):2227-2236.
[18] Jin P S,Sook C K.Filler-elastomer interactions:influence of silane coupling agent on crosslink density and thermal stability of silica/rubber composites[J].Journal of Colloid and Interface Science,2003,26(7):86-91.
