专题论文

MBSE:实现中国制造创新设计的使能技术探析

  • 刘玉生
展开
  • 浙江大学CAD & CG国家重点实验室, 杭州 310058
刘玉生,研究员,研究方向为CAD/CAE/CAM、模型驱动设计、模型检索与知识重用等,电子信箱:ysliu@cad.zju.edu.cn

收稿日期: 2017-08-28

  修回日期: 2017-11-03

  网络出版日期: 2017-11-29

基金资助

国家重点技术项目(2016YFD0400301);国家自然科学基金项目(61772247)

MBSE:The enabling technology for the innovative design of intelligent manufacturing in China

  • LIU Yusheng
Expand
  • State Key Lab of CAD & CG, Zhejiang University, Hangzhou 310058, China

Received date: 2017-08-28

  Revised date: 2017-11-03

  Online published: 2017-11-29

摘要

中国制造行业迫切需要创新设计技术,以实现中国"智"造。然而目前中国制造行业创新能力较弱。基于模型的系统工程(MBSE)由于其明显的优势正成为增强中国制造企业创新能力的重要使能技术。本文分析了MBSE的国内外研究现状,探讨了MBSE的建模方法、使能作用、实施挑战与方法,中国制造企业如何进行MBSE应用实施提出了建议。

本文引用格式

刘玉生 . MBSE:实现中国制造创新设计的使能技术探析[J]. 科技导报, 2017 , 35(22) : 58 -64 . DOI: 10.3981/j.issn.1000-7857.2017.22.007

Abstract

The creative design technology is urgently needed for realizing intelligent manufacturing on China. However, the Chinese manufacturing industry suffers from a weak creative capability. The model-based system engineering (MBSE) becomes an important enabling technology to enhance the innovation capability of the high-level manufacturing in China because of its obvious advantages. Based on the analysis of the state-of-art of the MBSE, the modeling method, the enabling effects, the challenges and the implementation methods of the MBSE are analyzed. Some suggestions are made for the MBSE implementation in Chinese high-level manufacturing enterprises.

参考文献

[1] 中华人民共和国国务院. 中国制造2025[EB/OL]. (2017-07-11). http://baike.sogou.com.
[2] 钟掘等. 复杂机电系统耦合设计理论与方法[M]. 北京:机械工业出版社, 2007.
[3] Michelle B, David H. System design:New product development for mechatronics[M]. Boston:Aberdeen Group, 2008.
[4] 杨涛, 杨育, 薛承梦, 等. 考虑客户需求偏好的产品创新设计方案多属性决策评价[J]. 计算机集成制造系统, 2015, 21(2):417-426.
[5] 刘晓敏, 檀润华, 姚立纲, 等.模糊前端阶段产品创新设计过程实现研究[J]. 计算机集成制造系统, 2009, 15(8):1457-1462.
[6] Fan H R, Liu Y S. Efficient recognition of the undesired coupling effects for system design of multidisciplinary products[J]. Journal of Engineering Design, 2016, 27(10):665-696.
[7] Fisher J. Model-based systems engineering:Anew paradigm[J]. Incose Insight, 1998, 1(3):3-16.
[8] http://www.omgsysml.org/#Specification.
[9] 刘玉生, 袁文强, 樊红日, 等. 基于SysML的模型驱动复杂产品设计的信息集成框架研究[J]. 中国机械工程, 2012, 23(12):1438-1445.
[10] Wayne W A. Model-based systems engineering[M]. Boca Raton:CRC Press, 1993.
[11] Incose. Systems engineering vision 2020[EB/OL]. (2017-11-09). www. incose.org.
[12] Westermann T, Anacker H, Dumitrescu R. Interdisciplinary system architecture for intelligent technicalsystems[C]. ASME 2015 International Mechanical Engineering Congress and Exposition, Houston:ASME, 2015.
[13] Cloutier R, Sauser B, Bone M, et al. Transitioning systems thinking to model-based systems engineering:Systemigrams to SysML models[J]. IEEE Trans Systems, Man Cybernetics, 2015, 45(4):662-674.
[14] Holt J, Perry S, Payne R, et al. A model-based approach for requirements engineering for systems ofsystems[J]. IEEE Systems Journal, 2015, 9(1):252-262.
[15] 徐京. 基于SysML的控制系统设计建模及初始详细设计模型的自动生成[D]. 杭州:浙江大学, 2014.
[16] 尹树悦, 杨云, 苗学问, 等. 基于SysML的反推力系统安全性分析[J]. 航空动力学报, 2011, 26(3):498-504.
[17] 严亚伟, 周雁舟. 基于概率模型检测的SysML活动图验证方法[J]. 计算机工程与设计, 2016, 4:928-932.
[18] 张昕, 曹云峰, 庄丽奎, 等. 基于SysML的飞控系统模型重用技术[J]. 太赫兹科学与电子信息学报, 2013, 4:567-571.
[19] 刘玉生, 樊红日, 蒋浴芹, 等. M-Design:多域复杂机电产品系统建模平台[J]. 软件学报, 2012, 23(Suppl.2):8-20.
[20] http://www.tongyuan.cc.
[21] 刘玉生, 蒋玉芹, 高曙明. 模型驱动的复杂产品系统设计建模综述[J]. 中国机械工程, 2010, 21(6):741-749.
[22] http://standards.ieee.org/findstds/standard/1220-1998.html.
[23] Cao Y, Liu Y S, Fan H R, et al. SysML-based uniform behavior modeling and automated mapping ofdesign and simulation model for complex mechatronics[J]. Computer-Aided Design, 2013, 45(3):764-776.
[24] Paredis C J J, Johnson T A. Using OMG's SysML to support simulation[C]. Proceedings of the 2008 Winter Simulation Conference, Global Gateway to Discovery. Miami, December 7-10, 2008.
[25] Fan H R, Liu Y S, Liu D H, et al. Automated generation of the computer-aided design model from thesystem structure for mechanical systems based on systems modeling language[J]. Journal of Engineering Manufacture, 2016, 230(5):883-908.
[26] Yuan W Q, Liu Y S, Wang H W, et al. A geometric structure based particle swarm optimization algorithm for multi-objective problems[J]. IEEE Trans System, Man and Cyber (Part B).https://core.ac.uk/download/pdf/44340405.pdf.
[27] Yuan W Q, Liu Y S, Zhao J J, et al. Pattern-based integration of system optimization in mechatronic system design[J]. Advances in Engineering Software, 2016, 98:23-27.
文章导航

/