结合改进的固定点算法，解决了噪声环境下的ICA问题。根据噪声分布特性，分两个阶段去除不同类型的随机噪声。在预处理阶段去除了加性高斯白噪声，预处理后的数据采用改进的固定点算法，盲分离出有效信号和非高斯随机噪声。提出了对固定点算法迭代过程中设定较精确的初始值问题的算法，该方法能较为准确地设置初始值，使算法能提取有效信号。通过仿真实验和对实际地震数据的处理，得到了满意的分离结果，较好地恢复了有效信号。此外，当实际地震数据加载了较强噪声，信噪比降低时，采用本文算法进行盲分离，同样取得了良好的效果，再次验证了本文算法具有良好的稳健性和适应性。将盲分离算法应用到实际地震数据处理方面的研究，有助于地震资料的解释，同时这种处理技术的研究也能够促进盲分离技术的发展。

An improved fixed-point algorithm is used to solve the ICA problem accompanied with noise. According to the noise distribution, it takes two phases to eliminate random noises of different types in preprocessing. The additive white Gaussian noise is removed at first, then the Improved FastICA algorithm is used to process the preprocessed data and to blindly separate the effective signal from non-Gaussian random noise. It might be a problem to set a good starting value in the iterative process of Improved FastICA. In this way, one can accurately set the starting value to make the algorithm recover the effective signal. The satisfactory separation results and better recovery of the effective signal are achieved as shown by the simulation experiments and real seismic data processing. Furthermore, in the case of the strong seismic noise with actually loaded and reduced SNR, this algorithm of blind separation also produces good results. This verifies that the algorithm has good robustness and adaptability. Using the algorithm of blind separation to do the seismic data enhancement can help to better interprete the seismic data, and promote the development of blind separation technology.