|
|
Component model establishment for polymer aging degradation and its application |
LU Xiang'an, JIANG Hanqiao, LI Junjian, FANG Wenchao, ZHAO Lin, PEI Yanli |
Key Laboratory of Petroleum Engineering of the Ministry of Education, China University of Petroleum, Beijing 102249, China |
|
|
Abstract: Aging degradation refers to the reduction of intrinsic viscosity and apparent viscosity, but the essence of this phenomenon is the breakage of large polymer molecules. During degradation, the distribution of polymer molecular weight changes, but its total mass concentration remains unchanged. If the polymer solution is made up of several pure components with different molecular weights, then a multi-component model can be used to describe the process of polymer degradation. Based on this idea, a twocomponent model of polymer degradation is established. In this model, polymer degradation occurs between two-components, large molecule component and small molecule component. Intrinsic viscosity and degradation coefficient of the latter component are obtained from laboratory experiment. These two parameters are used in the two-component model to describe the change of intrinsic viscosity during degradation. Furthermore, apparent viscosity change is obtained using semi-empirical relationship between intrinsic viscosity and apparent viscosity. Compared with the multi-component model, the two-component model not only reflects the polymer degradation mechanism but also the two parameters required are easier to obtain.
|
Received: 15 January 2015
|
|
|
|
|
[1] 刘睿, 姜汉桥, 张贤松, 等. 海上中低粘度油藏早期注聚合物见效特征 研究[J]. 石油学报, 2010, 31(2): 280-283. Liu Rui, Jiang Hanqiao, Zhang Xiansong, et al. Effective characteristics of early polymer flooding in mid-to-low viscosity offshore reservoir[J]. Acta Petrolei Sinica 2010, 31(2): 280-283.
[2] 王德民, 程杰成, 杨清彦. 粘弹性聚合物溶液能够提高岩心的微观驱 油效率[J] . 石油学报, 2000, 21(5): 45-51. Wang Demin, Cheng Jiecheng, Yang Qingyan. Viscous-elastic polymer can increase micro-scale displacement efficiency in cores[J]. Acta Petrolei Sinica, 2000, 21(5): 45-51.
[3] 王启民, 冀宝发, 隋军, 等. 大庆油田三次采油技术的实践与认识[J]. 大庆石油地质与开发, 2001, 20(2): 1-8. Wang Qimin, Ji Baofa, Sui Jun, et al. Practice and knowledge of tertiary recovery technique in Daqing oilfield[J]. Petroleum Geology & Oilfield Development in Daqing, 2001, 20(2): 1-8.
[4] 张冲, 李季, 黄芬, 等. 耐温抗盐新型聚合物驱油剂性能评价[J]. 油田 化学, 2007, 4(3): 228-231. Zhang Chong, Li Ji, Huang Fen, et al. Performance properties of AM/ AMPS/N-PMI tercopolymer L00and L05 as heat resistant and salt tolerant polymer for EOR[J]. Oil Chemistry, 2007, 24(3): 228-231.
[5] Choi B I, Jeong M S, Lee K S. Temperature-dependent viscosity model of HPAM polymer through high- temperature reservoirs[J]. Polymer Degradation and Stability, 2014, 110: 225-231
[6] GaGao J, Yu J, Wang W, et al. The accelerated degradation of aqueous polyacrylamide at low temperature[J]. Journal of Applied Polymer Science, 1998, 69(4): 791-797.
[7] H Y, Yang M H. The ultrasonic degradation of polyacrylamide solution[J]. Polymer testing, 2003, 22(2): 129-131.
[8] 邵振波, 周吉生, 孙刚, 等. 部分水解聚丙烯酰胺驱油过程中机械降解 研究[J]. 油田化学, 2005, 22(1): 72-77. Shao Zhenbo, Zhou Jisheng, Sun Gang, et al. Studies on mechanical degradation of partially hydrol ized polyacrylamide in course of polymer flooding[J]. Oil Chemistry, 2005, 22(1): 72-77.
[9] Caulfield M J, Hao X, Qiao G G, et al. Degradation on polyacrylamides. Part I. Linear polyacrylamide[J]. Polymer, 2003, 44(5): 1331-1337.
[10] 韩杰, 孔柏岭, 吕小华. 不同油藏温度条件下HPAM水解度与黏度变 化规律[J]. 油田化学, 2006, 23(3): 235-238. Han Jie, Kong Boling, Lü Xiaohua. Study on changes of hydrolysis degree and solution viscosity of HPAM at different reservoir temperatures[J]. Oil Chemistry, 2006, 23(3): 235-238.
[11] Maláč J. Simulation of degradation processes: Influence of degradation on molecular weight distribution: First approach. I. Random crosslinking and chain scission[C]//Journal of Polymer Science Part C: Polymer Symposia. Hoboken: Wiley Subscription Services, Inc., 1971, 33(1): 223-237.
[12] Radke C J. A random-scission model for chemical degradation of polymer solutions[J]. SPE Reservoir Engineering, 1988, 3(1): 349-352.
[13] Sorbie K S, Roberts L J. A model for calculating polymer injectivity including the effects of shear degradation[C]. SPE Enhanced Oil Recovery Symposium, Tulsa, Oklahoma, 15-18 April, 1984.
[14] Rodriguez F, Cohen C, Ober C K, et al. Principles of polymer systems[M]. Washington, DC: Crc Press, 2014.
[15] Manke C W, McAdams J E, Williams M C. Concentration dependence of non-Newtonian viscosity in blended theta solvents[J]. Die Makromolekulare Chemie, Rapid Communications, 1984, 5(3): 165- 168. |
|
|
|