激光选区熔化技术在钴基高温合金制备中的应用进展

doi:10.3981/j.issn.1000-7857.2020.02.003

Abstract
Figure/Table
References (0)
Related Citation (0)

Download: PDF (1419 KB) HTML^new
Export: BibTeX | EndNote (RIS)

Abstract: The Cobalt-based superalloy enjoys a high strength and a good heat and corrosion resistance, with a wide range of applications in biomedicine, aerospace and other fields. In recent years, the rapid development of the additive manufacturing technology represented by the selective laser melting technology (SLM) has provided new possibilities for the processing and the application of high-temperature alloys such as the cobalt-based superalloys. Compared with the traditional processing methods, the additive manufacturing technology has many advantages, such as the customization, the fairly easy processing of complex structural parts and the short manufacturing cycle. This paper reviews the applications of the selective laser melting (SLM) technology in the preparation of the cobalt-based superalloys, as well as the tests for the density and mechanical properties, and the influence of the process parameters on the density, the hardness and other mechanical properties such as the roughness, the tensile strength. In order to meet the actual use demand, the postprocessing might be needed and the influence of the postprocessing should be considered.

Key words： cobalt-based superalloy selective laser melting laser additive manufacturing

Received: 19 December 2019

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	CHEN Chaoyue
	WANG Xiaodong
	WANG Jiang
	REN Zhongming

Cite this article:

CHEN Chaoyue,WANG Xiaodong,WANG Jiang, et al. Progress on application of selective laser melting in preparation of cobalt-based superalloy[J]. Science & Technology Review, 2020, 38(2): 19-25.

URL:

http://www.kjdb.org/EN/10.3981/j.issn.1000-7857.2020.02.003 OR http://www.kjdb.org/EN/Y2020/V38/I2/19

[1] Pillai R, Wessel E, Nowak W J, et al. Predicting effect of base alloy composition on oxidation-and interdiffusion-induced degradation of an MCrAlY coating[J]. The Journal of the Minerals, Metals & Materials Society, 2018, 70(8):1520-1526.
[2] Wang Z, Yan Y, Su Y, et al. Effect of electrochemical corrosion on the subsurface microstructure evolution of a CoCrMo alloy in albumin containing environment[J]. Applied Surface Science, 2017, 406:319-329.
[3] Munoz A I, Schwiesau J, Jolles B M, et al. In vivo electrochemical corrosion study of a CoCrMo biomedical alloy in human synovial fluids[J]. Acta Biomaterialia, 2015, 21:228-236.
[4] 杨永强, 刘洋, 宋长辉. 金属零件3D打印技术现状及研究进展[J]. 机电工程技术, 2013, 42(4):1-7.
[5] Zhou Y, Li N, Yan J, et al. Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods[J]. The Journal of prosthetic dentistry, 2018, 120(4):617-623.
[6] Kempen K, Thijs L, Van Humbeeck J, et al. Processing AlSi₁₀Mg by selective laser melting:Parameter optimisation and material characterisation[J]. Materials Science and Technology, 2015, 31(8):917-923.
[7] Guo N, Leu M C. Additive manufacturing:Technology, applications and research needs[J]. Frontiers of Mechanical Engineering, 2013, 8(3):215-243.
[8] 韩寿波, 张义文, 田象军, 等. 航空航天用高品质3D打印金属粉末的研究与应用[J]. 粉末冶金工业, 2017, 27(6):44-51.
[9] Li D, He J, Tian X, et al. Additive manufacturing:Integrated fabrication of macro/microstructures[J]. Jixie Gongcheng Xuebao(Chinese Journal of Mechanical Engineering), 2013, 49(6):129-135.
[10] Conner B P, Manogharan G P, Martof A N, et al. Making sense of 3D printing:Creating a map of additive manufacturing products and services[J]. Additive Manufacturing, 2014, 1:64-76.
[11] Van Elsen M, Al-Bender F, Kruth J P. Application of dimensional analysis to selective laser melting[J]. Rapid Prototyping Journal, 2008, 14(1):15-22.
[12] Di W, Yongqiang Y, Xubin S, et al. Study on energy input and its influences on single-track, multi-track, and multi-layer in SLM[J]. The International Journal of Advanced Manufacturing Technology, 2012, 58(9-12):1189-1199.
[13] 杨恬恬, 闫岸如, 王燕灵, 等. K640高温合金激光选区熔化成形工艺及性能研究[J]. 应用激光, 2016, 36(1):5-12.
[14] Cloots M, Kunze K, Uggowitzer P J, et al. Microstructural characteristics of the nickel-based alloy IN738LC and the cobalt-based alloy Mar-M509 produced by selective laser melting[J]. Materials Science and Engineering:A, 2016, 658:68-76.
[15] Lu Y, Gan Y, Lin J, et al. Effect of laser speeds on the mechanical property and corrosion resistance of CoCrW alloy fabricated by SLM[J]. Rapid Prototyping Journal, 2017, 23(1):28-33.
[16] Wang J H, Ren J, Liu W, et al. Effect of selective laser melting process parameters on microstructure and Properties of Co-Cr Alloy[J]. Materials, 2018, 11(9):1546.
[17] Wen S F, Li S, Wei Q S, et al. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts[J]. Journal of Materials Processing Technology, 2014, 214(11):2660-2667.
[18] Di W, Yang Y Q, Su X B, et al. Study on energy input and its influences on single-track, multi-track, and multi-layer in SLM[J]. The International Journal of Advanced Manufacturing Technology, 2012, 58(9-12):1189-1199.
[19] Chen Z W, Darvish K, Pasang T. Effects of Laser Power on Track Profile and Structure Formation during Selective Laser Melting of CoCrMo Alloy[C]//Materials Science Forum. Trans Tech Publications, 2017, 879:330-334.
[20] Ciurana J, Hernandez L, Delgado J. Energy density analysis on single tracks formed by selective laser melting with CoCrMo powder material[J]. The International Journal of Advanced Manufacturing Technology, 2013, 68(5-8):1103-1110.
[21] Niendorf T, Leuders S, Riemer A, et al. Highly anisotropic steel processed by selective laser melting[J]. Metallurgical and Materials Transactions B, 2013, 44(4):794-796.
[22] 王迪, 杨永强, 黄延录, 等. 层间扫描策略对SLM直接成型金属零件质量的影响[J]. 激光技术, 2009, 34(4):447-451.
[23] Pupo Y, Serenó L, de Ciurana J. Surface quality analysis in selective laser melting with CoCrMo powders[C]//Materials Science Forum. Trans Tech Publications, 2014, 797:157-162.
[24] ASM specialty handbook:Heat-resistant materials[M]. Ohio:ASM International, 1997.
[25] Davies J R. ASM specialty handbook:Nickel, cobalt, and their alloys[J]. Materials Park, Ohio:ASM International, 2000, doi:10.5860oice.38-6206.
[26] 张强, 张宏炜, 贾新云, 等. 钴基铸造高温合金K6509的研究[J]. 材料工程, 2009(suppl1):142-145.
[27] Yang F M, Sun X F, Guan H R, et al. On the low cycle fatigue deformation of K40S cobalt-base superalloy at elevated temperature[J]. Materials Letters, 2003, 57(19):2823-2828.
[28] Jiang L, Brooks C R, Liaw P K, et al. Low-cycle fatigue behavior of ULTIMET^® alloy[J]. Metallurgical and Materials Transactions A, 2004, 35(3):785-796.
[29] Monroy K, Delgado J, Ciurana J. Study of the pore formation on CoCrMo alloys by selective laser melting manufacturing process[J]. Procedia Engineering, 2013, 63:361-369.
[30] Li R, Liu J, Shi Y, et al. 316L stainless steel with gradient porosity fabricated by selective laser melting[J]. Journal of Materials Engineering and Performance, 2010, 19(5):666-671.
[31] Gong H, Rafi K, Gu H, et al. Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes[J]. Additive Manufacturing, 2014, 1:87-98.
[32] F. Rezai-Aria, François M, Rémy L. Thermal fatigue of MAR-M 509 superalloy I:The influence of specimen geometry[J]. Fatigue & Fracture of Engineering Materials & Structures, 2010, 11(4):277-289.
[33] Rezai-Aria F, Dambrine B, Rémy L. Thermal fatigue of MAR-M509 superalloyII:Evaluation of life prediction models[J]. Fatigue & Fracture of Engineering Materials & Structures, 1988, 11(4):291-302.
[34] Mróz M, Orłowicz W, Tupaj M. Evaluation of fractures in MAR-M509 alloy samples after fatigue strength tests[J]. Archives of Foundry Engineering, 2010, 10(3):115-118.
[35] Kajima Y, Takaichi A, Kittikundecha N, et al. Effect of heat-treatment temperature on microstructures and mechanical properties of Co-Cr-Mo alloys fabricated by selective laser melting[J]. Materials Science and Engineering:A, 2018, 726:21-31.
[36] Bedolla-Gil Y, Juarez-Hernandez A, Perez-Unzueta A, et al. Influence of heat treatments on mechanical properties of a biocompatility alloy ASTM F75[J]. Revista Mexicana De Fisica, 2009, 55(1):1-5.
[37] Huang Y L. Effect of heat treatment on properties of cast CoCrMo alloy[J]. Shanghai Gangyan, 2003, 4(1):27-31.
[38] Antunes L H M, Hoyos J J, Fonseca E B, et al. Effect of phase transformation on ductility of additively manufactured Co-28Cr-6Mo alloy:An in situ synchrotron X-ray diffraction study during mechanical testing[J]. Materials Science and Engineering:A, 2019, 764:138262.
[39] Lee S H, Takahashi E, Nomura N, et al. Effect of heat treatment on microstructure and mechanical properties of Ni-and C-free Co-Cr-Mo alloys for medical applications[J]. Materials transactions, 2005, 46(8):1790-1793.
[40] Yan X, Lin H, Wu Y, et al. Effect of two heat treatments on mechanical properties of selective-laser-melted Co-Cr metal-ceramic alloys for application in thin removable partial dentures[J]. The Journal of prosthetic dentistry, 2018, 119(6):1028.
[41] Zhang G Q, Li J X, Zhou X Y, et al. Effect of heat treatment on the properties of CoCrMo alloy manufactured by selective laser melting[J]. Journal of Materials Engineering and Performance, 2018, 27(5):2281-2287.