|
|
Analysis of aeronautical materials' and products' demand for environmental testing data resource |
LUO Chen, SUN Zhihua, LIU Ming, PAN Qiao |
AECC Key Laboratory on Advanced Corrosion and Protection for Aviation Materials, AECC Beijing Institute of Aeronautical Materials, Beijing 100095, China |
|
|
Abstract: Aeronautical materials' and products' demand for data, data resources sharing and data presenting style is analyzed from the perspectives of designing, planning, testing, applying and repairing department of industry and military, and discussed in the following aspects. 1) Systematic accumulation of environmental data, environmental effect data related to hotspot issues such as severe natural environment and induced environment, aeronautical microclimatic environment, operational environment, co-effect of environment and working condition, where environmental damaging rule, properties degradation rule, failure mechanism of the materials, coatings, component and products should be studied. 2) Establishment of a framework for environmental testing digital management and supporting scheme for data sharing & information exchange, so that an information platform is provided for environment testing application. 3) Reinforcement of analysis and secondary exploration of environmental testing data and acquirement of hidden knowledge. Finally, achievements from environmental testing should be engaged to the whole process of aeronautical products designing, manufacturing, application and maintenance, so that the technical mode route of "prediction-protection" can be realized.
|
Received: 29 April 2020
|
|
|
|
[1] 萧以德, 王光雍, 李晓刚, 等. 我国西部地区大气环境腐蚀性及材料腐蚀特征[J]. 中国腐蚀与防护学报, 2003, 23(4):248-255.
[2] 王振尧, 于国才, 韩薇, 等. 我国自然环境大气腐蚀性调查[J]. 腐蚀与防护, 2003, 24(8):323-326.
[3] 李家柱. 大气环境及腐蚀性[J]. 装备环境工程, 2005, 2(1):70-74.
[4] 王玲, 牟献良, 朱蕾, 等. 大气环境腐蚀性分类分级研究综述[J]. 装备环境工程, 2010, 7(6):24-27.
[5] 刘凯吉. 大气腐蚀环境的分类及腐蚀性评定[J]. 全面腐蚀控制, 2015, 29(10):26-27.
[6] 揭敢新, 王俊, 张晓东, 等. 高分子材料用于我国大气环境严酷度比较的研究[J]. 装备环境工程, 2012, 9(6):10-12.
[7] 秦晓洲, 李颖. 军用装备自然环境试验方法剪裁探讨[J]. 装备环境工程, 2011, 8(3):54-57.
[8] 骆晨, 李明, 孙志华, 等. 海洋大气环境中飞机的环境损伤和环境适应性研究进展[J]. 航空材料学报, 2016, 26(3):101-107.
[9] 骆晨, 李宗原, 孙志华, 等. 直升机蒙皮典型结构有机涂层防护性能在加速试验中的变化[J]. 装备环境工程, 2017, 14(3):8-13.
[10] 骆晨, 李宗原, 孙志华, 等. 直升机旋翼桨叶有机涂层防护性能在户内加速试验中的变化[J]. 装备环境工程, 2016, 13(1):1-7.
[11] 祁凤玉, 李家柱, 刘明辉. 团岛试验站腐蚀环境的特点[J]. 材料保护, 2001, 34(11):1-2.
[12] 唐其环, 李军念, 代红. 万宁滨海与西沙群岛大气腐蚀性对比研究[J]. 装备环境工程, 2010, 7(6):1-4.
[13] 骆晨, 孙志华, 汤智慧, 等. 舰船平台环境因素数据采集方法探讨[C]//探索创新交流(第7集)——第七届中国航空学会青年科技论坛论文集(下册). 珠海:中国科学技术出版社, 2016:560-564.
[14] 墨淑芬, 张正, 宋诗哲, 等. 基于电偶的大气腐蚀性检测仪的研制及应用[J]. 腐蚀科学与防护技术, 2004, 16(6):398-400.
[15] 骆晨, 孙志华, 汤智慧, 等. 利用薄片穿透法确定铝合金最大蚀坑深度[J]. 装备环境工程, 2019, 16(3):17-21.
[16] Ganther W D, Paterson D A, Lewis C, et al. Monitoring aircraft microclimate and corrosion[J]. Procedia Engineering, 2017, 188:369-376.
[17] Cole I S, Corrigan P, Ganther W D, et al. Recent progress in intelligent vehicle health monitoring[J]. Key Engineering Materials, 2013, 558:357-363.
[18] 潘峤, 张骐, 王璐, 等. 三种可磨耗封严涂层的抗腐蚀性能[J]. 装备环境工程, 2017, 14(6):93-96.
[19] 杨斌, 檀傈锰, 田勇, 等. 材料腐蚀数据共享平台构建方法研究[J]. 中国腐蚀与防护学报, 2011, 31(3):214-218.
[20] 万军. 典型装甲车辆平台环境数据采集与数据库管理[J]. 装备环境工程, 2010, 7(6):234-236.
[21] 万军, 朱蕾, 朱玉琴. 环境基础数据资源共享平台研究[J]. 装备环境工程, 2010, 7(6):228-230.
[22] 万军, 吴蔓林, 李正雄."装备腐蚀电子档案" 设计与实现[J]. 装备环境工程, 2010, 7(3):82-84.
[23] 张志明, 黄少东, 庞丹. 弹体热冲拔成形工艺数据库研究与开发[J]. 精密成形工程, 2013, 5(6):36-41.
[24] 程治国, 肖鹏, 邹洪庆, 等. 航空轻质材料腐蚀防护工艺网络数据库设计[J]. 装备环境工程, 2008, 5(3):21-23.
[25] 李曼丽, 易忠, 肖琦, 等. 航天器磁环境试验数据库的建设[J]. 航天器环境工程, 2009, 26(4):343-346.
[26] 王越, 孙瑞侠, 马学刚, 等. 航空材料数据管理与应用平台的开发与应用[J]. 航空制造技术, 2014, 15:38-43.
[27] 张兵, 秦云霞, 陈燕, 等. 航空材料微观组织数据库平台的设计与实现[J]. 失效分析与预防, 2015, 10(6):161-163.
[28] 赖俊滨, 陆峰, 刘明, 等. 气象工作在北京站材料腐蚀控制研究中的进展[J]. 装备环境工程, 2008, 5(4):84-88.
[29] 赖俊斌, 李家柱. 航空材料环境试验数据库及专家咨询系统结构设计研究[J]. 材料工程, 1998, 7(7):41-43.
[30] 林业科学数据中心. 林业科学数据库和数据共享技术标准与规范[M]. 北京:中国林业出版社, 2006.
[31] 廖顺宝. 地球系统科学数据资源体系研究[M]. 北京:科学出版社, 2010.
[32] 诸云强. 地球系统科学数据共享关键技术研究[M]. 北京:科学出版社, 2009.
[33] 陈源, 王丰, 朱蕾, 等. 可靠性数据资源应用体系建设现状及发展趋势[J]. 装备环境工程, 2013, 10(4):61-65.
[34] 唐平, 黄晓霞. 环境试验数据资源建设的思考[J]. 装备环境工程, 2014, 11(6):140-147.
[35] 杨小奎, 张伦武, 肖勇, 等. 军工材料环境适应性标杆数据应用探讨[J]. 装备环境工程, 2016, 13(6):52-58.
[36] 张晓云, 马颐军, 孙志华, 等. 部分钢铁材料在北京地区腐蚀规律研究[J]. 腐蚀与防护, 2004, 25(7):277-280.
[37] 刘明辉, 张晓云, 赖俊滨, 等. 江津、武汉、宜昌大气腐蚀预测方程的建立[J]. 腐蚀科学与防护技术, 2004, 16(4):240-242.
[38] 张晓云, 蔡健平, 马颐军, 等. 耐候钢和碳钢大气腐蚀规律分析[J]. 腐蚀科学与防护技术, 2004, 16(6):389-391.
[39] 汪学华, 王宇宏. 模糊模式识别在大气环境腐蚀性评价中的应用[J]. 装备环境工程, 2006, 3(1):22-25.
[40] 吴超, 付冬梅, 李晓刚, 等. 基于数据分析的大气腐蚀等级细化研究[J]. 全面腐蚀控制, 2015, 12(4):16-21.
[41] 梁彩凤, 侯文泰. 钢的大气腐蚀预测[J]. 中国腐蚀与防护学报, 2006, 26(3):129-135.
[42] 骆晨, 王强, 孙志华, 等. 热带海洋大气环境中2A97铝锂合金的初期腐蚀机理[J]. 腐蚀与防护, 2015, 36(Z2):49-54.
[43] 骆晨, Albu S P, 孙志华, 等. 硼酸-硫酸阳极氧化2A97 Al-Cu-Li合金在热带海洋大气环境中的初期腐蚀机理[J]. 材料工程, 2016, 44(9):8-15.
[44] 骆晨, 孙志华, 汤智慧, 等. 防护性有机涂层体系失效研究的发展趋势[J]. 装备环境工程, 2017, 14(8):50-54.
[45] 骆晨, 刘明, 孙志华, 等. 航空结构材料环境适应性研究进展及发展方向[J]. 装备环境工程, 2014, 11(6):10-14. |
[1] |
. [J]. , 2004, 22(0412): 1-1. |
|
|
|
|