Articles

Oil-sand Phases Flow Detection Based on Acoustic Emission Technology

  • CHEN Chao ,
  • YU Qiling ,
  • QIAN Yuxiang ,
  • LIU Pengtao
Expand
  • 1. Second Plant of Oil Production, Xinjiang Oilfield Company, PetroChina, Karamay 834000, China;
    2. Experiment Testing Institute, Xinjiang Oilfield Company, PetroChina, Karamay 834000, China;
    3. Development Company, Xinjiang Oilfield Company, PetroChina, Karamay 834000, China;
    4. CNOOC Safety & Technology Services Co., Ltd., Tianjin 300452, China

Received date: 2013-12-03

  Revised date: 2014-01-24

  Online published: 2014-03-26

Abstract

The sand production problem in unconsolidated sandstone reservoir development has become increasingly prominent. To decrease the difficulty of oil well sand production management, moderate sanding techniques are usually used to maximize the benefit of oil and gas wells. Therefore, it is significant to develop oil-sand flow detection technology for timely and effective prediction and control of oil and gas well sand production. This paper proposes a method of flow detection in oil-sand phases based on acoustic emission technology. The method uses ultrasonic to measure the oil phase flow, also uses acoustic emission sensors to detect sand signal in oil flow, and build the experimental device of oil-sand flow detection, then analyzes the signal characteristics through specialized collection software. The results show that with other conditions remaining unchanged, acoustic emission power increases with the increase of sand mass and oil velocity, and decreases with increasing sand size; finally the acoustic emission power model of sand mass, sand size and oil velocity is established to obtain the sand flow information.

Cite this article

CHEN Chao , YU Qiling , QIAN Yuxiang , LIU Pengtao . Oil-sand Phases Flow Detection Based on Acoustic Emission Technology[J]. Science & Technology Review, 2014 , 32(8) : 58 -63 . DOI: 10.3981/j.issn.1000-7857.2014.08.009

References

[1] 王泽勇. 液固两相流参数测量方法研究[J]. 科协论坛, 2011(11): 95. Wang Zeyong. Liquid- solid two- phase flow parameter measurement method research [J]. Journal of Association for Science and Technology BBS, 2011 (11) : 95.
[2] 丁馨, 赵刚. 多相流计量技术现状[J]. 辽宁化工, 2010, 39(11): 1159- 1160. Ding Xin, Zhao Gang. Multiphase flow metering technology status [J]. Journal of Liaoning Chemical Industry, 2010, 33 (11): 1159-1160.
[3] 吕宇玲, 何利民. 多相流计量技术综述[J]. 天然气与石油, 2004, 22 (4): 78-85. Lü Yuling, He Limin. Multiphase flow metering technology review [J]. Journal of Natural Gas and Oil, 2004, 22(4): 78-85.
[4] 冯定, 徐冠华, 袁咏心, 等. 多相流量计的现状以及发展趋势[J]. 机械 与电子, 2010(2): 77. Feng Ding, Xu Guanhua, Yuan Yongxin, et al. The Status Quo and Development Trend of the Multiphase Flow Meter [J]. Machinery and Electronics, 2010 (2) : 77.
[5] 薛国民, 沈毅. 弯管流量计测量多相流实验研究[J]. 油气田地面工程, 2006, 10(25): 10-11. Xue Guomin, Shen Yi. Elbow flowmeter measurement of multiphase flow experimental study[J]. Oil and Gas Field Surface Engineering, 2006, 10(25): 10-11.
[6] 赵延军, 李国光, 王式民. 双弯管法测量气固两相流质量流量的研究[J]. 计量学报, 2005, 26(2): 147-149. Zhao Yanjun, Li Guoguang, Wang Shimin. Double bend method of mass flowrate measurement of gas- solid two- phase flow research[J]. Journal of Measurement, 2005, 26(2): 147-149.
[7] 刘刚, 陈超.声发射技术在石油工程中的应用[J]. 中国科技信息, 2012, 1(1): 45-46. Liu Gang, Chen Chao. Acoustic emission technique in petroleum engineering [J]. China Science and Technology Information, 2012(1): 45-46.
[8] Ibrahim M, Haugsdal T. Optimum procedures for calibrating acoustic sand detector, gas field case[C]// Canadian International Petroleum Conference; Petroleum Society's 59th Annual Technical Meeting. Calgary: Petroleum Society of Canada, 2008: 191-201.
[9] Fan C L, McLaury B S, Shirazi S A. Evaluation of electrical resistance probes to detect pipeline erosion and sand production in low liquid loading flow conditions[C]. SPE Eastern Regional Meeting, Columbus, Ohio, USA, August 17-19, 2011.
[10] Earles D M, Stoesz C W, Amaral A S, et al. Real-time strain monitoring of sand- control completions[C]. SPE Annual Technical Conference and Exhibition, Florence, Italy, September 19-22, 2010.
[11] 程文杰. 超声波流量计在输气管道现场应用的情况[D]. 成都: 西南 石油大学, 2011. Cheng Wenjie. Field application of the ultrasonic flowmeter in the pipeline[D]. Chengdu: Southwest Petroleum University, 2011.
[12] 刘刚, 陈超, 韩金良, 等. 液固两相流声发射检测系统设计及实验室 评价[J]. 振动与冲击, 2012, 31(22): 178-182. Liu Gang, Chen Chao, Han Jinliang, et al. Acoustic emission device design and laboratory evaluation for fluid- solid wwo phase flow[J]. 2012, 31(22): 178-182.
[13] 殷祥超. 振动理论与测试技术[M]. 徐州: 中国矿业大学出版社, 2007. Yan Xiangchao. Vibration theory and testing techniques[M]. Xuzhou: China University of Mining Press, 2007.
[14] 杨西侠, 柯晶. 信号分析与处理.[M]. 北京: 机械工业出版社, 2007. Yang Xixia, Ke Jing. Signal analysis and processing[M]. Beijing: Mechanical Industry Press, 2007.
[15] 刘刚, 陈超, 韩金良.AE检测液固两相流室内模拟研究[J]. 科技导 报, 2012, 30(22): 25-27. Liu Gang, Chen Chao, Han Jingliang. Acoustic emission indoor simulation of fluid- solid two phase flow test [J]. Science & Technology, 2012, 30(22): 25-27.
[16] 刘刚, 陈超, 韩金良, 等.用于液-固两相体系中固相颗粒质量计量 的冲击检测装置, 中国: 202596701[P]. 2012-12-12. Liu Gang, Chen Chao, Han Jingliang et al. The compact detection device used for measuring the solid phase quality in the liquid - solid two-phase system, China: 202596701[P]. 2012-12-12.
[17] 刘刚, 陈超, 钱致颖, 等.用于液-固两相体系中液流流量计量的超 声波检测装置, 中国: 202599456[P]. 2012-12-12. Liu Gang, Chen Chao, Qian Zhiying, et al. The ultrasonic testing device used for measuring the fluid flowrate in the liquid - solid twophase system, China: 202599456[P]. 2012-12-12.
Outlines

/