Articles

Propagation of 3D vertical crack on material interface and its influencing factors

  • WU Bin
Expand
  • Shengli College, China University of Petroleum, Dongying 257000, China

Received date: 2014-10-20

  Revised date: 2015-01-27

  Online published: 2015-05-05

Abstract

When a 3D vertical crack propagates on the interface between bi-materials, there are three route choices. To study this problem, a crack propagation model of the 3D vertical crack on material interface is established. A linear spring layer model is used to simulate the imperfect interface and calculate the shear displacement and the shear stress along the interface. Then, the distribution of the energy release rate is calculated along the edge of the crack. The influencing factors of route choices, such as the crack length, the interface parameters and the elasticity modulus, are analyzed. It is shown that the interface shear displacement increases with the increase of the crack length, which means that the interface slips easily. The larger the interface parameters, the smaller the energy release rate and the interface shear displacement will be. In other words, the crack propagation through and along the interface might be greatly hampered if the interface parameters increase. When the crack is in the harder material, it might penetrate the interface and goes into the softer material easily.

Cite this article

WU Bin . Propagation of 3D vertical crack on material interface and its influencing factors[J]. Science & Technology Review, 2015 , 33(8) : 58 -62 . DOI: 10.3981/j.issn.1000-7857.2015.08.009

References

[1] Li X F, Fan T Y. The asymptotic stress field for a rigid circular inclusion at the interface of two bonded dissimilar elastic half space materials[J]. International Journal of Solids and Structures, 2001, 38: 44-45.
[2] Shin K C, Liu H, Lee J J, et al. Interfacial crack tip field in anisotropic isotropic bimaterials[J]. Composite Structures, 2004, 66: 1-4.
[3] 宋鸣, 李有堂, 魏兴春. 双材料垂直于界面裂纹应力强度因子的有限元法[J]. 科学技术与工程, 2008,8(28): 5544-5548. Song Ming, Li Youtang, Wei Xingchun. Finite element method for stress intensity factor of a crack perpendicular to bimaterial interface[J]. Science Technology and Engineering, 2008, 8(28): 5544-5548.
[4] 董宇光, 李慧剑, 严小丽. 四点剪切加载下混凝土裂纹扩展路径研究[J]. 固体力学学报, 2004, 25(2): 198-202. Dong Yuguang, Li Huijian, Yan Xiaoli. Analysis of the crack propagation path of concretes under four- point shear load[J]. Acta Mechanica Solida Sinica, 2004, 25(2): 198-202.
[5] Wang X, Pan E, Chung P W. Some basic problems in anisotropic bimaterials with a viscoelastic interface[J]. International Journal of Solids and Structures, 2009, 46(20): 3725-3733.
[6] Benveniste Y, Miloh T. Imperfect soft and stiff interfaces in twodimensional elasticity[J]. Mechanics of Materials. 2001, 33(6): 309-323.
[7] Chen W Q, Zhou Y Y, Lu C F, et al. Bending of multiferroic laminated rectangular plates with imperfect interlaminar bonding[J]. European Journal of Mechanics A /Solids, 2009, 28(4): 720-727.
[8] Antipov Y A, Avila-Pozos O, Kolaczkowski S T, et al. Mathematical model of delamination cracks on imperfect interfaces[J]. International Journal of Solids and Structures, 2001, 38(36-37): 6665-6697.
[9] Zhong X C, Li X F, Lee K Y. Analysis of a mode-I crack perpendicular to an imperfect interface[J]. International Journal of Solids and Structures, 2009, 46(6): 1456-1463.
[10] Peirce A P, Gu H R, Siebrits E. Uniform asymptotic Green's functions for efficient modeling of cracks in elastic layers with relative shear deformation controlled by linear springs[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2009, 33: 285- 308.
[11] 钟献词, 张克实. 垂直于双材料非完美界面II型裂纹的断裂分析[J]. 应用数学和力学, 2012, 33(3): 342-352. Zhong Xianci, Zhang Keshi. Fracture analysis of a mode- II crack perpendicular to an imperfect bimaterial interface[J]. Applied Mathematics and Mechanics, 2012, 33(3): 342-352.
[12] 杨焕强, 王瑞和, 周卫东. 垂直于双材料非完美界面的裂纹断裂分析[J]. 科学技术与工程, 2013, 13(35): 10450-10454. Yang Huanqiang, Wang Ruihe, Zhou Weidong. Fracture analysis of crack perpendicular to an imperfect bimaterial interface[J]. Science Technology and Engineering 2013, 13(35): 10450-10454.
[13] Irwin G R. Onset of fast crack propagation in high strength steel and aluminum alloys[C]. Sagamore: Research Conference Proceedings, 1956, 2: 289-305.
[14] 解德, 钱勤, 李长安. 断裂力学中的数值计算方法及工程应用[M]. 北京: 科学出版社, 2009. Xie De, Qian Qin, Li Chang'an. Fracture mechanics of numerical method and its engineering application[M]. Beijing: Science Press, 2009.
Outlines

/