[1] 张向红, 王艳辉. 采用镀覆金刚石的技术经济效益分析[J]. 金刚石与 磨料磨具工程, 2011, 31(3): 61-64. Zhang Xianghong, Wang Yanhui. Analysis for economic benefits of Ticoated diamonds technology[J]. Diamond & Abrasives Engineering, 2011, 31(3): 61-64.
[2] 王艳辉, 李晓虎, 常锐, 等. 金刚石微粉表面镀覆对线锯的关键作用分 析[J]. 金刚石与磨料磨具工程, 2013, 33(3): 26-30. Wang Yanhui, Li Xiaohu, Chang Rui, et al. Effect of coated diamond micro powder on diamond wire saw manufacturing technology[J]. Diamond & Abrasives Engineering, 2013, 33(3): 26-30.
[3] Yamazaki T, Suzumura A. Brazing-filler material and method for brazing diamond: US, 6889890[P]. 2005-05-10.
[4] Chattopadhyay A, Chollet L, Hintermann H. Experimental investigation on induction brazing of diamond with Ni- Cr hardfacing alloy under argon atmosphere[J]. Journal of Materials Science, 1991, 26(18): 5093- 5100.
[5] Chen S M, Lin S T. Brazing diamond grits onto a steel substrate using copper alloys as the filler metals[J]. Journal of Materials Engineering and Performance, 1996, 5(6): 761-766.
[6] 伍俏平, 邓朝晖, 潘占, 等. 钎焊气氛对金刚石钎焊性能的影响[J]. 机 械工程学报, 2012, 48(4): 51-57. Wu Xiaoping, Deng Zhaohui, Pan Zhan, et al. Effect of brazing atmosphere on brazing performance of diamond[J]. Journal of Mechanical Engineering, 2012, 48(4): 51-57.
[7] 姚正军, 徐鸿钧. Ni-Cr合金与金刚石和钢基体界面微区的分析研究 [J]. 南京航空航天大学学报, 2001, 33(4): 311-314. Yao Zhengjun, Xu Hongjun. Micro-analysis of interface between Ni-Cr alloy and diamond[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2001, 33(4): 311-314.
[8] 秦喜杰, 殷声, 赖和怡. 金刚石工具胎体材料中碳化物形成元素的行 为[J]. 粉末冶金技术, 1992, 10(2): 87-91. Qin Xijie, Yin Sheng, Lai Heyi. Behavior of carbide-forming elements in matrix materials of diamond tools[J]. Powder Metallurgy Technology, 1992, 10(2): 87-91.
[9] Chattopadhyay A, Chollet L, Hintermann H. On performance of brazed bonded monolayer diamond grinding wheel[J]. CIRP Annals- Manufacturing Technology, 1991, 40(1): 347-350.
[10] Sung C M. Metal bond diamond tools that contain uniform or patterned distribution of diamond grits and method of manufacture thereof: US, 6286498[P]. 2001-09-11.
[11] Sung C M. Brazed diamond tools and methods for making: US, 6679243 [P]. 2004-01-20.
[12] Sung J C. Diamond tools with diamond grits set in a predetermined pattern[C]//Materials Science Forum. 2007, 534-536: 1101-1104.
[13] Wang C, Zhou Y, Zhang F, et al. Interfacial microstructure and performance of brazed diamond grits with Ni-Cr-P alloy[J]. Journal of Alloys and Compounds, 2009, 476(1): 884-888.
[14] Ham J O, Chung J H, Jung S K, et al. Interfacial behaviors of vacuum brazed joint between diamond grit and Ni-13Sn-28Cr filler alloy[J]. Advanced Materials Research, 2013, 705(6): 132-142.
[15] Chen Y, Fu Y, Su H, et al. The effects of solder alloys on the morphologies and mechanical properties of brazed diamond grits[J]. International Journal of Refractory Metals and Hard Materials, 2014, 42(10): 23-29.
[16] Huang S F, Tsai H L, Lin S T. Effects of brazing route and brazing alloy on the interfacial structure between diamond and bonding matrix [J]. Materials Chemistry and Physics, 2004, 84(2): 251-258.
[17] Hsieh Y Z, Lin S T. Diamond tool bits with iron alloys as the binding matrices[J]. Materials Chemistry and Physics, 2001, 72(2): 121-125.
[18] Sung J C, Sung M. The brazing of diamond[J]. International Journal of Refractory Metals and Hard Materials, 2009, 27(2): 382-393.
[19] 卢金斌, 张旺玺, 张雷, 等. 添加石墨对Ni-Cr合金保护气氛钎焊金 刚石磨粒界面组织的影响[J]. 机械工程学报, 2014, 50(4): 80-84. Lu Jinbin, Zhang Wangxi, Zhang Lei, et al. Effect on microstructure for adding graphite to Ni-Cr alloy wher brazing diamond abrasive in controlled atmosphere[J]. Journal of Mechanical Engineering, 2014, 50 (4): 80-84.
[20] 赵彬, 贺亚勋, 卢金斌, 等. 添加Cu粉对Ni-Cr合金真空钎焊金刚石 磨粒界面组织的影响[J]. 中原工学院学报, 2014, 25(3): 8-10. Zhan Bin, He Yaxun, Lu Jinbin, et al. Effect of microstructure of vacuum brazing diamond abrasive with Ni- Cr alloy added copper powder[J]. Journal of Zhongyuan University of Technology, 2014, 25 (3): 8-10.
[21] Hsieh Y C, Lin S T. Microstructural development of Cu-Sn-Ti alloys on graphite[J]. Journal of Alloys and Compounds, 2008, 466(1): 126- 132.
[22] Li W C, Lin S T, Liang C. Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy [J]. Metallurgical and Materials Transactions A, 2002, 33(7): 2163- 2172.
[23] Khalid F, Klotz U, Elsener H R, et al. On the interfacial nanostructure of brazed diamond grits[J]. Scripta Materialia, 2004, 50(8): 1139-1143.
[24] Klotz U E, Liu C, Khalid F A, et al. Influence of brazing parameters and alloy composition on interface morphology of brazed diamond[J]. Materials Science and Engineering A, 2008, 495(1): 265-270.
[25] Buhl S, Leinenbach C, Spolenak R, et al. Failure mechanisms and cutting characteristics of brazed single diamond grains[J]. The International Journal of Advanced Manufacturing Technology, 2013, 66 (5-8): 775-786.
[26] Suzumura A, Yamazaki T. Brazing- filler material and method for brazing diamond: US, 6889890[P]. 2005-05-10.
[27] Yamazaki T, Suzumura A. Reaction products at brazed interface between Ag- Cu- V filler metal and diamond (111) [J]. Journal of Materials Science, 2006, 41(19): 6409-6416.
[28] 武志斌, 肖冰. 金刚石与金属基体钎焊机理的研究[J]. 工具技术, 2000, 34(11): 6-8. Wu Zhibin, Xiao Bing. Research on mechanism of brazing diamond to metal-base[J]. Tool Engineering, 2000, 34(11): 6-8.
[29] Sun F, Feng J, Li D. Bonding of CVD diamond thick films using an Ag-Cu-Ti brazing alloy[J]. Journal of Materials Processing Technology, 2001, 115(3): 333-337.
[30] 李丹, 孙文山. Ag-Cu-Ti钎料在金刚石表面的润湿状况[J]. 哈尔滨 理工大学学报, 2000, 5(3): 101-104. Li Dan, Sun Wenshan. Infiltration of Ag-Cu-Ti brazing on diamond [J]. Journal Harbing University Science & Techology, 2000, 5(3): 101-104.
[31] 关砚聪, 陈玉全, 姚德明. Ag-Cu-Ti钎料钎焊单晶金刚石磨粒的研 究[J]. 金刚石与磨料磨具工程, 2005, 25(3): 23-25. Guan Yancong, Chen Yuquan, Yao Deming. Study on soldering singlecrystal diamond abrasive with Ag-Cu-Ti solder[J]. Diamond & Abrasives Engineering, 2005, 25(3): 23-25.
[32] 卢金斌, 徐九华. Ag-Cu-Ti钎焊金刚石的界面结构及热应力分析 [J]. 稀有金属材料与工程, 2009, 38(4): 642-646. Lu Jinbin, Xu Jiuhua. Interface microstructure and thermal stress of diamond brazing with Ag-Cu-Ti filler[J]. Rare Metal Materials and Engineering, 2009, 38(4): 642-646.
[33] Klotz U, Khalid F, Elsener H R. Nanocrystalline phases and epitaxial interface reactions during brazing of diamond grits with silver based Incusil-ABA alloy[J]. Diamond and Related Materials, 2006, 15(10): 1520-1524.
[34] 张凤林, 周玉梅, 付凯旋, 等. Cr、Ti金属粉改善Ag-Cu-Zn合金对金 刚石的钎焊性能研究[J]. 金刚石与磨料磨具工程, 2007, 27(3): 22- 25. Zhang Fenglin, Zhou Yumei, Fu Kaixuan, et al. Adding Cr/Ti metal powder to improve brazing performance of Ag-Cu-Zn alloy to diamond [J]. Diamond & Abrasives Engineering, 2007, 27(3): 22-25.
[35] Wulf E, Bachmann H, Möhwald K, et al. The influence of brazing temperature and surface roughness on the wettability of reactive brazing alloys[J]. International Journal of Materials Research, 2014, 105(3): 240-248.
[36] 马伯江, 徐鸿钧, 傅玉灿, 等. 两种钎焊金刚石工具微观结构的对比 分析[J]. 机械工程材料, 2006, 29(7): 10-13. Ma Bojiang, Xu Hongjun, Fu Yucan, et al. Microstructure of brazed diamond tools made by two different techniques[J]. Materials for Mechanical Engineering, 2006, 29(7): 10-13.
[37] Chen Y, Xu H, Fu Y, et al. Effect of brazing atmospheres on interfacial microstructure between diamond grits and brazing alloy[J]. Journal of Nanjing University of Aeronautics and Astronautics, 2009, 25(4): 248-253.
[38] Buhl S, Leinenbach C, Spolenak R, et al. Microstructure, residual stresses and shear strength of diamond-steel-joints brazed with a Cu- Sn- based active filler alloy[J]. International Journal of Refractory Metals and Hard Materials, 2012, 30(1): 16-24.
[39] 钟如涛, 秦应雄, 唐霞辉, 等. 金刚石颗粒-金属粉末的CO2激光烧结 机理研究[J]. 金刚石与磨料磨具工程, 2009, 29(4): 18-23. Zhong Rutao, Qin Yingxiong, Tang Xiahui, et al. Study on CO2 laser sintering for the mixture of metallic powder and diamond grits[J]. Diamond & Abrasives Engineering, 2009, 29(4): 18-23.
[40] 马伯江, 徐鸿钧. 高频感应钎焊镀钛金刚石界面特征的研究[J]. 金刚 石与磨料磨具工程, 2007, 27(3): 1-3. Ma Bojiang, Xu Hongjun. A study on the interfacial characteristic of Ti-coated diamond brazed by high-frequency induction[J]. Diamond & Abrasives Engineering, 2007, 27(3): 1-3.
[41] 李文杰, 肖冰, 段端志, 等. 铜基预钎焊金刚石锯片的界面分析及其 性能研究[J]. 金刚石与磨料磨具工程, 2014, 34(2): 44-47. Li Wenjie, Xiao Bing, Duan Duanzhi, et al. Interface analysis and performance evaluation of the Cu- based pre- brazed diamond saw blade[J]. Diamond & Abrasives Engineering, 2014, 34(2): 44-47.
[42] Duan D Z, Xiao B, Wang B, et al. Microstructure and mechanical properties of pre- brazed diamond abrasive grains using Cu- Sn- Ti alloy[J]. International Journal of Refractory Metals and Hard Materials, 2015, 48(1): 427-432.
