[1] Rao N, Basu S. Poolside inspection facility for PWR fuel assemblies[J]. Iaea Tecdoc 1050, 1998, 40(2): 71-80.
[2] Tsuda T, Yamaguchi Y, Kosaka Y, et al. PIE results and new techniques applied for 55 GWd/t high burnup fuel of PWR[J]. Iaea Tecdoc 1635, 2003, 21(2): 34-42.
[3] Deng J X, Deng F. The setting of sipping test devices for irradiated fu-el in nuclear power plant[J]. Journal of Energy and Power Engineering, 2002, 6(12): 13-16.
[4] Shin J, Kim J, Kwon J. Poolside examination techniques applied for de-velopment of an advanced PWR fuel, PLUS7[J]. Icone Eighteenth, 2010, 7(1): 113-121.
[5] Kim J, Kwon J, Shin J. KNFC experience in fuel repair and poolside ex-amination[J]. Pacific Basin Nuclear Conference Tirteenth, 2002, 4(2): 55-62.
[6] Park J. KNFC fuel service technology development[J]. Smirt Eighteenth, 2005, 1(12): 25-33.
[7] 刘勤, 马凤鸣, 刘鸣. 差动变压式传感器位移测量系统设计[J]. 天津工程师范学院学报, 2005, 3(15): 21-27. Liu Qin, Ma Fengming, Liu Ming. Design of a measuring system using differential transformer sensor[J]. Tianjin University of Technology, 2005, 3(15): 21-27.
[8] 丁捷, 朱丽兵. 燃料棒更换装置的三维建模和运动仿真[J]. 核技术, 2010, 33(2):4-13. Ding Jie, Zhu Libing. 3-D modeling and motion simulation of fuel rodreplacing equipment[J]. Nuclear Techniques, 2010, 33(2): 4-13.
[9] 张丽琴, 钟志民, 李劲松, 等. 燃料组件控制棒包壳在役超声涡流自动检测[J]. 无损检测, 2005, 27(1): 22-28. Zhang Liqin, Zhong Zhimin, Li Jinsong, et al. In-service ultrasonic and eddy current auto-inspecting of RCCA cladding[J]. Nondestructive Testing, 2005, 27(1): 22-28.
[10] 屈国普, 凌球, 郭兰英, 等. 一种用于退役核燃料元件包壳的破裂检测技术[J]. 核技术, 2005, 28(6): 111-116. Qu Guopu, Ling Qiu, Guo Lanying, et al. A safety check-up method for decommissioned reactor fuel element cladding[J]. Nuclear Techniques, 2005, 28(6): 111-116.
[11] 曹殿鹏, 霍小东. VVER燃料组件变形对象限功率倾斜的影响[J]. 原子能科学技术, 2013, 47(增1): 15-19. Cao Dianpeng, Huo Xiaodong. Effect of VVER fuel assembly deformation on quadrant power tilt[J]. Atomic Energy Science and Technology, 2013, 47(Suppl 1): 15-19.
[12] 肖岷. 压水堆核电站燃料管理燃料制造与燃料运行[M]. 北京: 原子能出版社, 2009: 86-92. Xiao Min. Pressurized water reactor nuclear power plant fuel management, fuel fabrication and fuel run[M]. Beijing: Atomic Energy Press, 2009: 86-92.
[13] 李伟才, 肖中. 压水堆燃料组件弯曲变形机理及规避措施[J]. 核动力工程, 2004, 2(2): 49-55. Li Weicai, Xiao Zhong. Mechanism of fuel assembly bowing in PWR and preventive measures[J]. Nuclear Power Engineering, 2004, 2(2): 49-55.
[14] 邓浚献, 樊秀梅, 朱华, 等. 池边啜吸检测系统的研制[C]//中国核学会核能动力学会理事会换届暨第七届学术年会论文集. 北京: 中国原子能出版社, 2002: 25-29. Deng Xunxian, Fan Xiumei, Zhu Hua, et al. Development of the pool sipping detection system[C]//Chinese Nuclear Society Nuclear Society Council General Dynamics and Seventh Annual Conference Proceedings. Beijing: China Atomic Energy Press, 2002: 25-29.
[15] 沈秋平, 陈志清, 徐道平, 等. 燃料组件修复装置的设计[J]. 核技术, 2010, 33(2): 148-151. Shen Qiuping, Chen Zhiqing, Xu Daoping, et al. Design of the fuel subassembly repairing device[J]. Nuclear Technology, 2010, 33(2): 148-151.
[16] 李卓群, 薛新才, 郑宏练, 等. 辐照后破损燃料组件修复工艺及其专用设备: 中国, 200610087598.8[P]. 2006-06-16. Li Zhuoqun, Xue Xincai, Zheng Honglian, et al. Damaged irradiated fuel assemblies repair technology and special equipment: China, 200610087598.8[P]. 2006-06-16.
[17] 张兴田, AFA2G 17×17型燃料组件辐照变形超声测试系统研制及在线测试[M]. 北京: 原子能出版社, 2006. Zhang Xingtian. Development of deformation ultrasonic testing system for AFA2G 17×17 irradiated fuel assemblies and online testing[M]. Beijing: Atomic Energy Press, 2006.
[18] 何明智. 秦山第二核电厂燃料组件运行经验[J]. 中国核电, 2009, 2 (4): 354-362. He Mingzhi. Fuelassembly operation experience in Qinshan II[J]. China Nuclear Power, 2009, 2(4): 354-362.
[19] 叶国栋, 潘泽飞, 张兴田. 中核集团秦山第二核电厂燃料管理持续改进[C]//中国核学会2009年学术年会论文集. 北京: 中国原子能出版社, 2009: 37-44. Ye Guodong, Pan Zefei, Zhang Xingtian. Continuous improvement of Qinshan nuclear power plant fuel management[C]//Chinese Nuclear Society 2009 Annual Conference Proceedings. Beijing: China Atomic Energy Press, 2009: 37-44.
[20] 万志坚, 唐月明, 杨波, 等. 压水堆核电站辐照后燃料组件变形检测方法及其实现装置: 中国, 200810172214.1[P]. 2008-10-31. Wan Zhijian, Tang Yueming, Yang Bo, et al. The deformation detection methods for irradiated PWR fuel assemblies and its implementation device: China, 200810172214.1[P]. 2008-10-31.
[21] 焦万均, 韩震宇, 先登飞, 等. 模拟核燃料组件变形检测系统原理及实现[J]. 计量与测试技术, 2006, 11(33): 30-31. Jiao Wanjun, Han Zhenyu, Xian Dengfei, et al. The principle & realization mesuring simulative fuel assemblis' distortion[J]. Measurement and Testing Technology, 2006, 11(33): 30-31.
[22] 先登飞, 韩震宇, 陈万良, 等. 用激光扫描投影法检测核燃料模拟组件变形[J]. 激光与红外, 2006, 36(3): 184-186. Xian Dengfei, Han Zhenyu, Chen Wanliang, et al. Measuring simulated nucleus fuel modules' distortions with laser scan and projection method[J]. Laser & Infrared, 2006, 36(3): 184-186.
[23] 先登飞. 核燃料组件变形检测系统样机研制[D]. 成都: 四川大学, 2006. Xian Dengfei. Development of nuclear fuel assembly deformation detection system prototype[D]. Chengdu: Sichuan University, 2006.
[24] 刘赫. 核燃料组件变形尺寸测量系统设计[D]. 成都: 四川大学, 2005. Liu He. Design on nuclear fuel assembly deformation measurement system[D]. Chengdu: Sichuan University, 2005.
[25] 刘敬露, 王颖, 先登飞. 浅谈核燃料组件变形的评价[J]. 机电工程技术, 2008, 37(1):110-117. Liu Jinglu, Wang Yin, Xian Dengfei. Evaluation to the nuclear fuel assembly distortion[J]. Mechanical & Electrical Engineering Technology, 2008, 37(1): 110-117.
[26] 邓昌义. 核燃料组件检查仪技术改造研究[D]. 成都: 四川大学, 2005. Deng Changyi. Study on transformation of a nuclear fuel assembly tester[D]. Chengdu: Sichuan University, 2005.
[27] 刘敬露. 核燃料组件变形的评价及其实现[D]. 成都: 四川大学, 2006. Liu Jinglu. Evaluation of nuclear fuel assembly deformation and its implementation[D]. Chengdu: Sichuan University, 2006.
[28] 高永明, 李声, 李丽丹. 燃料组件水下非接触变形测量方法[J]. 核动力工程, 2010, 4(31): 87-90. Gao Yongming, Li Sheng, Li Lidan. A method for survey of underwater non-contact deformation of fuel assemblies[J]. Nuclear Engineering, 2010, 4(31): 87-90.
[29] Zwicky H U, Wiktor C G, Schrire D. Spent fuel performance assessment and research[J]. Iaea Tecdoc 1343, 2003, 2(11): 76-84.
[30] Shin J. Equipment operation and maintenance manual for poolside examination system[C]. Korea: Korea Nuclear Factory, 2012.
[31] Otomo S, Seki T, Kataoka K, et al. Poolside fuel inspection experience and development at NFI[J]. Smirt eighteen, 2005, 14(3): 38-44.
