With the bamboo powder as a typical plant fiber powder, this paper studies the thermal bonding theory for the bamboo powder and the thermoplastic resin. With the appropriate hot melt adhesive powder, a theoretical analysis of the thermal effect of the thermoplastic resin bonding mechanism is made for the bamboo powder particles. The experimental study of the laser sintering characteristics of bamboo powder/thermoplastic resin composite powder is made for the bamboo powder mixed with the thermoplastic resin powder, focusing on the average mechanical properties of the SLS parts. The mixture of the bamboo powder and the thermoplastic resin powder is used to manufacture complex casting parts and SLS forming member. The infiltration wax casting dimensional accuracy of parts and transfer characteristics are studied.
LI Jian
,
GUO Yanling
,
ZHAO Dejin
. Selected laser sintering characteristics of bamboo/plastic composite powders and application in investment casting[J]. Science & Technology Review, 2016
, 34(19)
: 96
-100
.
DOI: 10.3981/j.issn.1000-7857.2016.19.016
[1] Shih Y F,Cai J X,Kuan C S,et al.Plant fibers and wasted fiber/epoxy green composites[J].Composites Part B:Engineering,2012,43(7):2817-2821.
[2] Zakikhani P,Zahari R,Sultan M T H,et al.Extraction and preparation of bamboo fibre-reinforced composites[J].Materials & Design,2014,63:820-828.
[3] Wu Q,Chi K,Wu Y,et al.Mechanical,thermal expansion,and flammability properties of co-extruded wood polymer composites with basalt fiber reinforced shells[J].Materials & Design,2014,60:334-342.
[4] Misnon M I,Islam M M,Epaarachchi J A,et al.Potentiality of utilising natural textile materials for engineering composites applications[J].Materials & Design,2014,59:359-368.
[5] Liu D,Song J,Anderson D,et al.Bamboo fiber and its reinforced composites:Structure and properties[J].Cellulose,2012,19(5):1449-1480.
[6] Kuranska M,Prociak A.Porous polyurethane composites with natural fibres[J].Composites Science and Technology,2012,72(2):299-304.
[7] Porras A,Maranon A.Development and characterization of a laminate composite material from polylactic acid(PLA) and woven bamboo fabric[J].Composites Part B:Engineering,2012,43(7):2782-2788.
[8] Nirmal U,Hashim J,Low K O.Adhesive wear and frictional perfor-mance of bamboo fibres reinforced epoxy composite[J].Tribology Inter-national,2012,47:122-133.
[9] Li M F,Sun S N,Xu F,et al.Microwave-assisted organic acid extraction of lignin from bamboo:Structure and antioxidant activity investigation[J].Food Chemistry,2012,134(3):1392-1398.
[10] Guo Y,Zeng W,Jiang K.Preparation and selective laser sintering of wood-plastic composite powers and post processing[J].Digest Journal of Nanomaterials And Biostructures,2011,6(3):1435-1444.
[11] 姜凯译.木塑复合材料选择性激光烧结实验与后处理研究[D].哈尔滨:东北林业大学机电工程学院,2011.Jiang Kaiyi.Study on the experiment and the post processing of the wood plastic composite based on selective laser sintering[D].Harbin:College of Electromechanical Engineering,Northeast Forestry University,2011.
[12] 郭艳玲,姜凯译,辛宗生,等.木粉/PES复合粉末选择性激光烧结成形及后处理技术研究[J].电加工与模具,2011(6):29-32.Guo Yanling,Jiang Kaiyi,Xin Zongsheng,et al.Selective laser sintering prototyping and post processing techniques for wood-flour/PES composites[J].Electromachining & Mould,2011(6):29-32.
[13] 郭艳玲,姜凯译,于志祥,等.选择性激光烧结木塑复合材料的制备工艺及成型机理[J].上海交通大学学报,2011(9):1327-1331.Guo Yanling,Jiang Kaiyi,Yu Zhixiang,et al.The preparation technology and forming properties of wood-plastic composite powder used in selective laser sintering[J].Journal of Shanghai Jiaotong University,2011(9):1327-1331.