The high temperature ablation in the process of pulsed high current discharge would reduce the insulation performance of the insulation support and affect the life and efficiency of the system. To investigate the destructive effect of ablation on epoxy resin insulation, we use argon arc welding to modify the surface epoxy resin with different values of ablation current, time, distance and area so as to obtain samples with different ablation situations. The surface resistivity and surface flashover voltage of the samples are then measured. The results show that the insulation property of the epoxy resin after high temperature ablation degrades greatly. Scanning electron microscopy and energy spectrum analysis indicate that the increasing surface roughness and oxide would reduce the insulation property of epoxy resin.
ZHAO Weikang
,
XU Rong
,
YUAN Weiqun
,
YAN Ping
. Investigation on insulation support performance in electromagnetic launcher[J]. Science & Technology Review, 2017
, 35(15)
: 34
-39
.
DOI: 10.3981/j.issn.1000-7857.2017.15.004
[1] Kitamura Y, Hirbayashi S. Partial discharge deterioration of epoxy res-in for electronic parts[C]//Proceedings of the Conference on Electrical Insulation & Dielectric Phenomena. Millbrae:IEEE, 1985:485-490.
[2] 李波. 湿热老化对环氧树脂复合材料电学性能影响研究[D]. 武汉:武汉理工大学, 2010. Li Bo. Studyonthe effectof hydrothermalon electricalporperties of epoxy resin composites[D]. Wuhan:Wuhan University of Technology, 2010.
[3] 李庆民, 刘伟杰, 韩帅, 等. 环氧树脂绝缘高频电热联合老化中局部放电特性分析[J]. 高电压技术, 2015, 41(2):389-395. Li Qingmin, Liu Weijie, Han Shuai, et al. Analysis on partial discharge characteristics of epoxy resin insulation during high-frequency electrical-thermal aging[J]. High Voltage Engineering, 2015, 41(2):389-395.
[4] 陈博, 万红, 穆景阳, 等. 重频激光作用下碳纤维/环氧树脂复合材料热损伤规律[J]. 强激光与粒子束, 2008, 20(4):547-552. Chen Bo, Wan Hong, Mu Jingyang, et al. Ablative mechanism of carbon-fiber/epoxy compositeirradiated by repetition frequency laser[J]. High Power Laser and Particle Beams, 2008, 20(4):547-552.
[5] 邹平. 植物绝缘油的油纸浸渍与水解动力学特性及纳米改性方法研究[D]. 重庆:重庆大学, 2011. Zou Ping. Research on oil-paper impregnation and hydrolysis kinetic characteristics and nano-modification approaches of vegetable insulating Oils[D]. Chongqing:Chongqing University, 2011.
[6] 杨丽君, 徐积全, 胡恩德, 等. 变压器油中腐蚀性硫浓度对绕组绝缘电气性能的影响[J]. 电工技术学报, 2016, 31(10):42-48. Yang Lijun, XuJiquan, Hu Ende, et al. The influence of corrosive sulfur contentationinTransformeroil to the electrical properties of insulated windings[J]. Transactions of China Electrotechnical Society, 2016, 31(10):42-48.
[7] Feraboli P, Kawakami H. Damage of carbon/epoxy composite plates subjected to mechanical impact and simulated lightning[J]. Journal of Aircraft, 2010, 47(3):999-1012.
[8] Dong Q, Guo Y, Sun X, et al. Coupled electrical-thermal-pyrolytic analysis of carbon fiber/epoxy composites subjected to lightning strike[J]. Polymer, 2015, 56:385-394.
[9] Kawakami H, Feraboli P. Lightning strike damage resistance and toler-ance of scarf-repaired mesh-protected carbon fiber composites[J]. Com-posites Part A:Applied Science and Manufacturing, 2011, 42(9):1247-1262..
[10] 湛志华. 废弃电路板环氧树脂真空热裂解实验及机理研究[D]. 武汉:中南大学, 2012. Zhan Zhihua. Acuum pyrolysis and the mechanism research on wasteepoxy printed circuit boards[D]. Wuhan:Central South University, 2012.
[11] Sweeney M A, Brandenburg J E, Gerber R A, et al. Analysis of mech-anisms for anode plasma formation in ion diodes[C]//Proceedings of the 19835th International Conference on High-Power Particle Beams. San Francisco:IEEE, 1983:203-207.
[12] 赵文彬. 冲击电压下半导体材料表面闪络现象与机理的研究[D]. 西安:西安交通大学, 2007. Zhao Wenbin. Phenomena and mechanism of surface flashover across semiconducting materials under pulsed voltage[D]. Xi'an:Xi'an Jiaotong University, 2007.
