Special lssues

Progress in transient electronics in 2017

  • XU Hang ,
  • HUANG Xian
Expand
  • Department of Biomedical Engineering, School of Precision Instruments and Opto-electronics Engineering, Tianjin University, Tianjin 300072, China

Received date: 2017-12-25

  Revised date: 2018-01-02

  Online published: 2018-01-30

Abstract

Transient electronics, fabricated by degradable materials, can dissolve in natural environments after completing the default task. The corresponding decomposition products are biologically safe, offering an efficient approach to solving the pollution caused by electronicwastes. Transient electronics can compare favorably with the traditional devices through advanced fabrication technology in terms of performance, exhibiting promising applications in fields of environmental protection, medical equipment and information security. In this paper, we summarize the progresses in transient electronics in 2017, including degradable materials, degradable procedures, fabrication technology and transient devices.

Cite this article

XU Hang , HUANG Xian . Progress in transient electronics in 2017[J]. Science & Technology Review, 2018 , 36(1) : 12 -17 . DOI: 10.3981/j.issn.1000-7857.2018.01.002

References

[1] Tansel B. From electronic consumer products to e-wastes:Global outlook, waste quantities, recycling challenges[J]. Environment International, 2017, 98:35-45.
[2] Vogel T R, Dombrovskiy V Y, Carson J L, et al. Postoperative sepsis in the United States[J]. Annals of Surgery, 2010, 252(6):1065-1071.
[3] Zhou Z, Shi Z, Cai X, et al. The use of functionalized silk fibroin films as a platform for optical diffraction-based sensing applications[J]. Advanced Materials, 2017, 29:1605471.
[4] Yin L, Farimani A B, Min K, et al. Mechanisms for hydrolysis of silicon nanomembranes as used in bioresorbable electronics[J]. Advanced Materials, 2015, 27(11):1857-1864.
[5] Lee Y K, Yu K J, Song E, et al. Dissolution of monocrystalline silicon nanomembranes and their use as encapsulation layers and electrical interfaces in water-soluble electronics[J]. Acs Nano, 2017, doi:10.1021/acsnano.7b06697.
[6] Xu F, Zhang H, Jin L, et al. Controllably degradable transient electronic antennas based on water-soluble PVA/TiO2, films[J]. Journal of Materials Science, 2018, 53(4):2638-2647.
[7] Lei T, Guan M, Liu J, et al. Biocompatible and totally disintegrable semiconducting polymer for ultrathin and ultralightweight transient electronics[J]. Proceedings of the National Academy of Sciences of the United States of America, 2017, 114(20):5107-5112.
[8] Almuslem A S, Hanna A N, Yapici T, et al. Water soluble nano-scale transient material germanium oxide for zero toxic waste based environmentally benign nano-manufacturing[J]. Applied Physics Letters, 2017, 110(7):074103.
[9] Oliviero M, Rizvi R, Verdolotti L, et al. Dielectric properties of sustainable nanocomposites based on zein protein and lignin for biodegradable insulators[J]. Advanced Functional Materials, 2017, 27(8):1605142.
[10] Gao Y, Zhang Y, Wang X, et al. Moisture-triggered physically transient electronics[J]. Science Advances, 2017, 3(9):e1701222.
[11] Kim B H, Kim J H, Persano L, et al. Dry transient electronic systems by use of materials that sublime[J]. Advanced Functional Materials, 2017, 27(12):1606008.
[12] Yoon J, Lee J, Choi B, et al. Flammable carbon nanotube transistors on a nitrocellulose paper substrate for transient electronics[J]. Nano Research, 2017, 10(1):87-96.
[13] Mahajan B K, Yu X, Wan S, et al. Mechanically milled irregular zinc nanoparticles for printable bioresorbable electronics[J]. Small, 2017, 13(17):1700065.
[14] Shou W, Mahajan B K, Ludwig B, et al. Low-cost manufacturing of bioresorbable conductors by evaporation-condensationmediated laser printing and sintering of Zn nanoparticles[J]. Advanced Materials, 2017, 29(26):1700172.
[15] Lee Y K, Kim J, Kim Y, et al. Room temperature electrochemical sintering of Zn microparticles and its use in printable conducting inks for bioresorbable electronics[J]. Advanced Materials, 2017, 29(38):1702665.
[16] Lee G, Kang S K, Sang M W, et al. Fully biodegradable microsupercapacitor for power storage in transient electronics[J]. Advanced Energy Materials, 2017, 7(18):1700157.
[17] Jia X, Wang C, Ranganathan V, et al. A biodegradable thinfilm magnesium primary battery using silk fibroin-ionic liquid polymer electrolyte[J]. Acs Energy Letters, 2017, 2(4):831-836.
[18] Wang Z, Fu K, Liu Z, et al. Design of high capacity dissoluble electrodes for all transient batteries[J]. Advanced Functional Materials, 2017, 27(11):1605724.
[19] Xi H, Chen D, Lv L, et al. High performance transient organic solar cells on biodegradable polyvinyl alcohol composite substrates[J]. Rsc Advances, 2017, 7(83):52930-52937.
[20] Salvatore G A, Sülzle J, Valle F D, et al. Biodegradable and highly deformable temperature sensors for the internet of things[J]. Advanced Functional Materials, 2017, 27(35):1702390.
Outlines

/