In situ fabrication of silver azide micro-charge is investigated. Chemical precipitation method is employed to synthesize silver oxide nanoparticles. Silver azide is successfully fabricated by gas and solid phase in situ method using silver oxide nanoparticles as precursors. The effects of azidereacton time on microstructure and composition of silver azide are evaluated. Results show that silver azide is gradually synthesized in 1 h and that the increasing reaction time can promote the conversion of silver oxide nanoparticles to silver azide. Furthermore, the probe method is employed to measure the average velocity of flyer driven by silver azide micro-charge. Silver azide can be ignited by the Ni-Cr bridge wire and the average velocity of flyer is 2328 m·s-1. Due to its excellent detonation ability and thermal stability, silver azide micro-charge has a favorable application prospect in MEMS.
LI Mingyu
,
LIU Qiang
,
ZENG Qingxuan
,
WU Xingyu
. Study on silver azide micro-charge prepared by in situ method[J]. Science & Technology Review, 2021
, 39(11)
: 126
-130
.
DOI: 10.3981/j.issn.1000-7857.2021.11.014
[1] Jean D, Head I. MEMS micro-detonator based fuzing[C]. 2009 of the 53rd Annual Fuze Conference. San Diego:Naval Surface Warfare Center, 2009.
[2] Zhang F, Wang Y L, Bai Y W, et al. Preparation and characterization of copper azide nanowire array[J]. Materials Letters, 2012, 89(24):176-179.
[3] 李娜, 许建兵, 叶迎华, 等. 三维多孔微纳米结构叠氮化铜的原位合成及表征[J]. 火炸药学报, 2015, 38(4):63-66.
[4] Li B, Li M Y, Zeng Q X, et al. Monolithic nanoporous copper fabricated through decomposition and sintering of oxalate[J]. Micro & Nano Letters, 2016, 11(7):378-381.
[5] Li B, Li M Y, Zeng Q X, et al. In situ fabrication of monolithic copper azide[J]. Journal of Energetic Materials, 2016, 34(2):123-128.
[6] 陈秉文. 内嵌叠氮化铜碳纳米管复合薄膜的制备与性能研究[D]. 南京:南京理工大学, 2018.
[7] Yu Q X, Li M Y, Zeng Q X, et al. Copper azide fabricated by nanoporous copper precursor with proper density[J]. Applied Surface Science, 2018, 442:38-44.
[8] Yu Q X, Li M Y, Zeng Q X, et al. Copper azide prepared by reaction of hollow CuO microspheres with moist HN3 gas[J]. Materials Letters, 2018, 224:18-21.
[9] Matyáš R, Pachman J. Primary explosives[M]. Heidelberg:Springer, 2013.
[10] 刘丽娟, 盛涤伦, 朱雅红, 等. 叠氮化银的耐高温性能研究[J]. 火工品, 2018, 182(3):33-37.
[11] Zou J, Xu Y, Hou B, et al. Self-assembly Ag2O nanoparticles into nanowires with the aid of amino-functionalized silica nanoparticles[J]. Powder Technology, 2008, 183(1):122-126.
[12] Wang X, Wu H F, Kuang Q, et al. Shape-dependent antibacterial activities of Ag2O polyhedral particles[J]. Langmuir, 2010, 26(4):2774-2778.
[13] Chen X, Guo Z, Xu W H, et al. Templating synthesis of SnO 2 nanotubes loaded with Ag2O nanoparticles and their enhanced gas sensing properties[J]. Advanced Functional Materials, 2011, 21(11):2049-2056.
[14] Braam K, Subramanian V. A stencil printed, high energy density silver oxide battery using a novel photopolymerizable poly(acrylic acid) separator[J]. Advanced Materials, 2015, 27(4):689-694.
[15] 陆登俊, 杨晓光, 李营营, 等. 纳米氧化银的制备及应用研究进展[J]. 食品工业科技, 2018, 39(6):317-321.
[16] Li C W, Zhang Q C, Song F E, et al. Ultra-high endurance and high-performance quasi-solid-state fibershaped Zn-Ag2O battery to harvest wind energy[J]. Journal of Materials Chemistry A, 2019, 7(5):2034-2040.
[17] Ghica C, Damian R, Culita D, et al. Silver azide nanoparticles embedded into silica as energetic nanomaterials[J]. Materials Science-Medziagotyra, 2015, 1(3):329-332.
[18] Zeng Q X, Li B, Li M Y, et al. A miniature device for shock initiation of hexanitrostilbene by high-speed flyer[J]. Propellants, Explosives, Pyrotechnics, 2016, 41(5):864-869.
